Canon PowerShot A530 PowerShot A540 / A530 Manuals Camera User Guide Advanced - Page 49
Manually Setting the Shutter, Speed and Aperture
View all Canon PowerShot A530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Shooting Manually Setting the Shutter Speed and Aperture PowerShot A540 PowerShot A530 You can manually set the shutter speed and aperture to shoot images. z When you press the shutter button halfway, the difference between the standard exposure* and the selected exposure appears on the LCD monitor. If the difference is more than ±2 stops, "-2" or "+2" appears in red. * Standard exposure levels are calculated by measuring light according to the currently selected metering mode. . z If you wish to change the exposure, select shutter speed or aperture using the button, then adjust the value using the or button. z If the zoom is adjusted after these values are set, the aperture value may change in accordance with the zoom position. z The LCD monitor's brightness matches the selected shutter speed and aperture value. When you select a fast shutter speed or shoot a subject in a dark place, the image will always be bright if the flash is set to (Flash on, with red-eye reduction) or (Flash on). z The same shutter speeds that can be set for the PowerShot A540, can also be set for the PowerShot A530. See page 45 for details. z The aperture values that can be set for the PowerShot A530 are shown below. Some aperture values may not be available depending on the zoom position. For the PowerShot A540, see page 46. F2.6 F3.2 F3.5 F4.0 F4.5 F5.0 F5.5 F5.6 F6.3 F7.1 F8.0 F9.0 F10 F11 z The aperture value and shutter speed change according to the zoom state (p. 48). 47