Canon PowerShot ELPH 340 HS User Guide - Page 97

Connecting to Access Points in the List 1 View the listed access points. zzView the listed networks (access points) as described in steps 1 - 4 of "Connecting to WPS-Compatible Access Points" (=94). 2 Choose an access point. zzPress the buttons to choose a network (access point), and then press the button. 3 Enter the access point password. zzPress the button to access the keyboard, and then enter the password (= 93). zzPress the buttons to choose [Next], and then press the button. 4 Choose [Auto]. zzPress the buttons to choose [Auto], and then press the button. zzIf you selected [{], [2], or [ ] as the target device, see "Connecting to WPSCompatible Access Points", starting with step 9 (=95). zzIf you selected a Web service as the destination, see "Connecting to WPSCompatible Access Points", starting with step 12 (=96). • To determine the access point password, check on the access point itself or refer to the user manual. • Up to 16 access points will be displayed. If no access points are detected, choose [Manual Settings] in step 2 to manually set an access point. Follow onscreen instructions and enter an SSID, security settings, and a password. • When you use an access point that you have already connected to for connecting to another device, [*] is displayed for the password in step 3. To use the same password, press the buttons to choose [Next], and then press the button. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes P Mode Playback Mode Wi-Fi Functions Setting Menu Accessories Appendix Index 97