Canon PowerShot SD1200 IS User Guide - Page 86
Changing the Image Quality - sd card
View all Canon PowerShot SD1200 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Changing the Image Quality You can select between two image quality settings. Image Quality Table Select the image quality. ● After pressing the m button, press the op buttons to select . Select an option. ● Press the qr buttons to select an option, then press the m button. X The setting will display on the screen. Image Quality (Recording Pixels/Frame Rate) Content 640 × 480 pixels, 30 frames/sec. For shooting standard quality movies. 640 × 480 pixels, 30 frames/sec. LP The image quality will be lower than but you can record twice the length. with , 320 × 240 pixels, 30 frames/sec. Since the number of the recording pixels is smaller, the image quality will be lower than with , but you can record three times the length. Estimated Shooting Time Image Quality (Frame Rate) Shooting Time 2 GB 16 min. 0 sec. 8 GB 1 hr. 3 min. 57 sec. 30 min. 7 sec. 2 hrs. 0 min. 23 sec. 40 min. 58 sec. 2 hrs. 43 min. 44 sec. • Based on Canon's testing standards. • Recording will automatically stop when either the clip file size reaches 4 GB or the recording time reaches approximately 1 hour. • Recording may stop even if the maximum clip length has not been reached on some memory cards. SD Speed Class 4 or higher memory cards are recommended. 86