Canon REALiS LCOS SX7 Mark II User Manual - Page 3
AV Equipment, Set up the AV equipment.
View all Canon REALiS LCOS SX7 Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
AV Equipment 1. Install the projector. z Install the projector at the desired distance from the screen. z Install batteries in the remote control (P29) P32-33 2. Connect the projector. P64-68 z Connect the projector and the AV equipment with a cable* (see P38, 39 for the instruction on connecting a audio cable). 3. Turn on the projector. P40-41 z Connect the power cord and turn on the projector. z Adjust the height of the projecting image (P43). z Select a display language when turning on the projector for the first time (P41). 4. Press the button twice. z Adjust the focus of the screen. P46-47 5. Set up the AV equipment. z Turn on the AV equipment and play the video image. 6. Select the input signal by pressing the button. z Select DIGITAL VIDEO as the input signal for a digital video image.* For the other video image, go to step 7. P70-72 7. Press the button twice again. P70 z Adjust the input signal, focusing, keystone distortion, etc. automatically with the auto setup function. 8. Select the image mode with the button. P55-56 z Select an appropriate image mode for projection. z Specify the aspect ratio or display area in the [Aspect] menu as required (P73, 90, 91). Finishing the projection... Turn off the projector z Turn off the projector and unplug the power cord. P60-61 * Connect the projector and the AV equipment with a HDMI/DVI cable to project a digital video image (P65). 3