Canon REALiS LCOS WUX10 REALiS WUX10 User Manual - Page 48
Selecting an Input Signal, Press the OK button to determine the input signal type.
![]() |
View all Canon REALiS LCOS WUX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Selecting an Input Signal (INPUT) ■Selecting an Input Signal 1 Press the INPUT button to pop up a window shown at the lower right. Remote control Top control The currently active input signal is marked with a circle and highlighted in orange. An input signal that is ready for projection is displayed in white. When no signal is received, it is displayed in gray. [HDMI], [DIGITAL PC], and [ANALOG PC-1] may be displayed in gray even if they are ready for projection. 2 The selection is toggled through available input signal types by pressing the INPUT button. • You can select the target input signal with Only the input signals displayed in white can be selected. 3 Press the OK button to determine the input signal type. If no button is pressed in 4 seconds, the selected input signal type is chosen. < < 48
![](/manual_guide/products/canon-wux10-realis-wux10-user-manual-8806496/48.png)