Canon REALiS LCOS WUX6010 MULTIMEDIA PROJECTOR WUX6010 Users Manual - Page 157
Color Adjustment, Set [Marker] to [On].
View all Canon REALiS LCOS WUX6010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Advanced Guide Advanced Projection Advanced Projection 2 Set [Marker] to [On]. Marker lines are projected on the images. The red marker indicates the start position for adjustment, and the green marker, the end position. By default, the green and red markers are displayed in the same position, so only the red marker is visible. 3 Adjust [Start position] for the side where images overlap. Move the start marker to the outer edge of the overlapping area. 4 Adjust [Width]. Move the end marker to the inner edge of the overlapping area. The area between the starting and ending markers is called the blending area. Shading is applied to this area, and the brightness is adjusted to match portions that overlap with other areas. After you complete settings for one image, do the same thing for the other one to specify the blending area. Adjust the settings to make the blending area for each image the same. 5 Set [Marker] to [Off]. ■ Color Adjustment In overlapping projection, portions of images in the overlapping area that pick up other colors or are miscolored may be more noticeable. You can make this overlapping area appear less distracting by performing Color blending adjustment. 1 In the [Install settings] menu, select [Professional settings] > [Edge blending] > [Adjust] > [Color blending adjustment] > [Adjust]. 2 As you watch the image, adjust the value to eliminate unwanted colors in the overlapping area. First adjust red, green, and blue together by changing the [White] value, and then adjust [Red], [Green], and [Blue] values individually. 3 Repeat this adjustment on all projectors. 155