Canon REALiS SX7 Mark II Multimedia Projector SX7 MarkII/SX60/X700 User's Manu
Canon REALiS SX7 Mark II Manual
View all Canon REALiS SX7 Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon REALiS SX7 Mark II manual content summary:
- Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 1
MULTIMEDIA PROJECTOR User's Manual Table of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 2
with the auto setup function. 8. Press the button. P54 z Optimize the input signal with the auto PC function (Skip this step if the projector is projecting an image properly.) 9. Select the image mode with the button. P55-56 z Select an appropriate image mode for projection. z Specify the - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 3
screen. z Install batteries in the remote control (P29) P32-33 2. Connect the projector. P64-68 z Connect the projector and the AV equipment with a cable* (see P38, 39 for the instruction on connecting a audio cable). 3. Turn on the projector. P40-41 z Connect the power cord and turn on the - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 4
to start projection 2 Table of Contents 4 Safety Instructions 7 Safety Precautions...8 AC Power Cord Requirement 11 Projector 14 Installation Precautions 14 Features of the Multimedia Projector SX7 MarkII/SX60/X700 16 Supplied Manuals and Symbols Used in This Manual 17 Supplied Manuals - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 5
102 Selecting an Image Mode 102 Adjusting the Brightness 103 Adjusting the Contrast 103 Adjusting the Sharpness 104 Making a Gamma Correction 104 Making Color Adjustment (1) (SX7 II 105 Making Color Adjustment (2 105 Making Color Adjustment (3 106 Making Advanced Color Adjustment (1 106 5 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 6
the Ambient Light (SX7 II 108 Reducing the the Projector Operation 114 Enabling/Disabling the Guide Message Projector 120 Cleaning and Replacing the Air Filter 121 Replacing the Lamp ...122 Troubleshooting 126 WARNING Lamp Flash Patterns 126 Symptoms and Solutions 127 Appendix ...132 Supported - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 7
, or other accidents. If your projector is not operating correctly, read this manual again, check operations and cable connections, and try the solutions shown in the "Troubleshooting" section at the end of this booklet. If the problem still persists, contact the service center or the dealer where - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 8
INSTRUCTIONS Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. z This projector not cover the ventilation slot on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous. SIDE - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 9
the AC power supply before cleaning. Do not use liquid or aerosol cleaners on the projector. Use a damp cloth for cleaning. Follow all warnings and instructions marked on the projector. For added protection of the projector during a lightning storm, or when it is left unattended or unused for long - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 10
service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally after following the operating instructions - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 11
SAFETY INSTRUCTIONS AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirements for use in the country authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/environment. (EEA: Norway, Iceland and Liechtenstein) 11 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 12
SAFETY INSTRUCTIONS Federal Communication Commission Notice Multimedia Projector, Model: SX7 MarkII/SX60/X700 This device in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Plaza, Lake - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 13
Controller SAFETY INSTRUCTIONS Caution Observe z Insert batteries correctly according to the "+" and "-" markings. z If a fluid from a battery leaks and projector. Ask the Canon service representative to clean and check the inside of the projector and replace the lamp. Caution If the projector - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 14
give a shock to it, drop it, or place anything on it. The projector may be damaged or malfunctioned. z Do not transport the projector through a courier or transport service with the carrying bag. Put the projector in an impact-resistant transport case if such is the case. Installation Precautions - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 15
SAFETY INSTRUCTIONS Caution When placing the projector on a castered stand or table, be sure to lock the casters. z Failure to do so may cause the projector to move or topple, resulting in an injury. Position the projector in a horizontal position. Incorrect installation may cause troubles and - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 16
The MULTIMEDIA PROJECTOR SX7 MarkII/SX60/X700 are high-performance projectors which project the data from the computer and the moving picture from the DVD player to the big screen. Major Features Smooth and Beautiful Imaging Capability Incorporation of AISYS, Canon's unique optical engine, and LCOS - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 17
Document) This is a universal manual for the projector, SX7 MarkII/SX60/X700. This manual provides detailed information on how to use the projectors. Read this manual thoroughly to make the most of your projector and ensure safety. Important Information and Quick Start Guide First read document. It - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 18
COPYRIGHT NOTICE Please note that enlarging or reducing the size of an image for commercial purposes or public presentation may infringe on the legally protected copyright or the copyright holder of the original material. About Trademarks z Microsoft, Windows, Windows XP, Windows Vista and Windows 7 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 19
BEFORE USE Table of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 20
Before Use Supplied Accessories Check whether the following accessories are supplied with the projector. z Remote control z Batteries (type AAA, two) for remote control z Carrying bag z Lens cap z Lens cap strap z User's Manual (CD-ROM) z Warranty card z Important Information and Quick Start - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 21
from dust or scratches, and is not designed to protect the projector from external shocks. Align the lens with the dimple on the cushioning material. z User's Manual (CD-ROM) z Important Information and Quick Start Guide Cables Remote control z Wait until the cooling fan stops before putting - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 22
BEFORE USE Part Names Main Unit of Projector (SX7 MarkII is used in the following illustrations) Front Side Terminals and Connectors Infrared Remote Receiver (P29) Ranging Window Do not place any obstacle between the projector and the Caution screen, as the auto focusing function may fail to - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 23
) and an optional ceiling-mount pipe (part number: RS-CL08 or RS-CL09) when appropriate. Contact the dealer where you purchased the projector for more detailed information. z Make sure to use the optional ceiling mounting bracket. z You should never install the ceiling mounting bracket by yourself - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 24
(1) Infrared Remote Emitter Sends a signal to the infrared remote receiver on the main unit. (2) POWER button (P40, 60) (11) (12) Turns the projector on or off. (14) (3) AUTO SET button (P46, 70) (15) Performs auto adjustment on focusing, keystone distortion, screen color (13) correction - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 25
Top Control (7) (8) (9) BEFORE USE (2) (3) (5) (6) (11) (12) (10) (10) POINTER button (P87) Selects the upper, lower, left, or right item in the menu. Also moves the mouse cursor under the USB connection. On the top control, the [] buttons also turn the volume up and down, - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 26
Input Terminals on Main Unit SX7 MarkII/X700 (1) (10) (2) (3) BEFORE USE (5) SX60 (10) (5) (6) (4) (10) (9) (8) (7) (6) (1) (10) (2) (3) (7) (8) (9) 26 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 27
to display an image on an external monitor. (4) AUDIO OUT terminal (SX7 II/X700) (P68) The audio output terminal to output an audio to an Receives an S-Video signal from an AV equipment. (8) SERVICE PORT jack Exclusively used by the service personnel (it is not used normally). (9) USB terminal - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 28
being turned on. Blink between red and green: The projector is under the power management mode. (2) WARNING lamp (P126) Flashes red when a problem has been detected on the projector. (3) LED illumination lamp (P115) Indicate the projector status with 3 blue LEDs. Blinking from the left: The - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 29
on the main unit is exposed to direct sunlight or strong light of lighting equipment. z The remote control uses infrared light. z When you use two projectors at the same time, you can change the channel settings to pre- vent the two remote controls from interfering with each other (P115). 29 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 30
- Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 31
contents/Safety Instructions Before Use Setting Up the Projector SETTING UP THE Projecting an Image from the Computer PROJECTOR Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 32
screen from the intersection of optical axis and screen surface when an image is projected at right angle to the screen. z Install the projector at the position where the projection distance is between approximately 1.2 m (3.9') to 9 m (29.5'). If the installation position is too close or too far - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 33
a bright room, it is recommended to limit ambient lighting in order to improve the image quality. Ceiling Mounting or Rear Projection You can mount the projector on the ceiling (Ceiling mounted) with it turned up side down or place it behind the screen (Rear) if you use a translucent screen. For - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 34
- Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 35
/Safety Instructions Before Use Setting Up the Projector PROJECTING AN IMAGE FROM THE COMPUTER Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 36
cable PROJECTING AN IMAGE FROM THE COMPUTER Input Terminal-1 (ANALOG IN-1) Projector Input Terminal-2 (ANALOG IN-2) Projector Input Signal: Select [ANALOG PC-1] (P48) Input Signal: Select [ANALOG on the computer. For more detailed information, refer to your computers instruction manual. 36 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 37
z Before connecting cables, turn off both the projector and computer. z It may project an image inappropriately when projecting the digital PC signal in 1280 x 1024 or 1400 x 1050 depending on the type of computer or DVI cable (SX7 II/SX60). z The USB terminal is used to use the remote control as - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 38
can display an image from the projector to an external monitor. VGA cable Connecting to AUDIO IN Terminals (SX7 II/X700) Connect an audio cable to SX7 MarkII/X700 Image input terminal (mini D-sub 15-pin terminal) z You can connect one external monitor. The multi-monitor display is not supported. z - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 39
speaker. Audio cable AUDIO OUT terminal Computer Commercial Audio cable PROJECTING AN IMAGE FROM THE COMPUTER AUDIO IN terminal Projector SX60 z Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. z The built-in speaker - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 40
the power plug to ground. Otherwise, the operating computer may suffer electromagnetic radiation problems and poor reception by TV and radio. Unplug the Power Cord When the Projector is Not in Use The projector constantly consumes approximately 7W power even when it is turned off. To ensure safety - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 41
is displayed for approximately 20 seconds, and then the guiding message for the auto setup function appears. Adjust the password if the Password input screen appears (P116, 117). z You can turn on the projector by connecting the power cord without pressing the [POWER] button (direct power on) (P112 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 42
fine adjustment. Zoom out: Press [ ] for rough adjustment. Press [ - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 43
the projection angle can be adjusted up to 10 degrees. z If the projector is tilting in the lateral direction, use the rear adjustable feet on both sides . If the distortion is too large, adjust the height of the projector with a pedestal. The keystone distortion can be corrected with the Auto - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 44
AN IMAGE FROM THE COMPUTER Preparing the Computer Determining the Output Resolution of the Computer To make the most of the display performance of this projector, set output signal resolution of the computer to an optimum value. Windows 7 1. Open the [Control Panel] from the start menu, then select - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 45
output signal resolution of the computer from the [Resolution] list. 4. Close [System Environment Setting] window. For SX7 MarkII/SX60 z If the display resolution of the computer is set to SXGA (1280 by 1024 dots) or on the model. For details, see the instructions of your notebook computer. 45 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 46
the screen color correction may not be performed properly depending on the brightness of the room or the condition of the screen. Adjust the image manually if such is the case. z If you select [16:9] for [Screen aspect], [Auto screen color] may not correct the screen color properly. If such is - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 47
PROJECTING AN IMAGE FROM THE COMPUTER 2 Press the [AUTO SET] button. The Auto setup window appears. 3 Press the [AUTO SET] button again. One or more functions highlighted in black are performed automatically. z You can perform this step by selecting [OK] with the [ - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 48
< PROJECTING AN IMAGE FROM THE COMPUTER Selecting an Input Signal You can select an input signal type. Select an input signal from the followings: ANALOG PC-1 : Analog signal Connecting with a DVI/Mini D-sub 15-pin cable (supplied cable) DIGITAL PC : Digital signal Connecting with a DVI digital - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 49
< PROJECTING AN IMAGE FROM THE COMPUTER < 3 If the target input signal is unavailable from the list at the left, press the [>] button, and then press the [ ] / [ ] button to select the target input signal from the list at the right. 4 Press the [OK] button. 49 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 50
< < PROJECTING AN IMAGE FROM THE COMPUTER < < Selecting ANALOG PC-2 z Select [ANALOG PC-2] for Input Terminal-2. 1 Press the [INPUT] button. The [INPUT] window appears. 2 Select the second top item in the menu with the [INPUT] button. The selection is toggled through available input signals from - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 51
Adjusting the Focus You can adjust the focus. Follow the steps below to adjust the focus manually if the Auto setup function (Auto focus) does not adjust the focus appropriately. 1 Press the range of 1.2 m (3.9') to 9 m (29.5'). Move the projector installation position if such is the case (P32). 51 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 52
Adjusting Keystone Distortion The Auto setup function (Auto keystone) automatically adjusts the keystone distortion in a longitudinal direction. Follow the steps below if the function does not adjust the distortion appropriately or you want to adjust the keystone distortion in a horizontal direction - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 53
PROJECTING AN IMAGE FROM THE COMPUTER 3 Press the [OK] button. z The result of keystone adjustment is memorized. If you place the projector at the same position, the keystone adjustment is not necessary. z When the Keystone adjustment is selected, signals are processed digitally. The image may look - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 54
number of dots and tracking depending on a signal type (SXGA+, XGA, etc.). The auto PC adjustment function does not need to be performed if the projector is projecting an image properly with [Auto Setup]. You can use this function if the input signal is [ANALOG PC-1] or [ANALOG PC-2]. 1 Press the - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 55
adjust the image quality (sharpness, gamma, color correction, etc.) as you like. 1 Press the [IMAGE] button. PROJECTING AN IMAGE FROM THE COMPUTER (SX7 MarkII) The Image mode window appears. The selection is toggled among following modes by pressing the button. [Standard] Select this to project - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 56
SX7 MarkII Standard Presentation Movie Photo AdobeRGB sRGB SX60 Standard Presentation Movie Home Cinema sRGB X700 Standard Presentation Movie sRGB z You can adjust the followings for - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 57
PROJECTING AN IMAGE FROM THE COMPUTER Selecting a Screen Mode (Aspect) You can select one of the following screen modes depending on the aspect ratio or display resolution of your computer. z You can specify the aspect ratio from the menu. Refer to [Aspect] in the menu (P90). z The available - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 58
True size Select this if you want to project a computer screen in its original size. A clear image can be obtained because of no image processing. z If the display resolution of the computer is higher than 1400 by 1050 dots (1024 by 768 dots for X700), select a lower resolution before starting - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 59
Auto screen color] may not correct the screen color properly. If such is the case, correct it manually. (P98) 16:9 D. image shift [ ]: Moves up the image. [ ]: Moves down - tion. z You cannot register the image for [Projector on], [No signal screen], or [NO SHOW]. z [SPOT] will be disabled. 59 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 60
for a long time may shorten the life of the lamp and internal optical components. z When the projector is turned off, it starts cooling the lamp. You cannot turn it on during the process. 1 Press the [POWER] button. A confirmation message appears on the - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 61
, and approximately 5 minutes later the lamp is turned off and the projector goes into the power management mode. You can select one of the or remote control is pressed. Exit mode Select this mode to turn off the projector automatically. In the exit mode, the lamp is turned off and cooled down - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 62
- Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 63
/Safety Instructions Before Use Setting Up the Projector PROJECTING AN IMAGE FROM AV EQUIPMENT Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 64
and AV equipment. z The above illustrations are just examples. For more detailed information, refer to the manual for the connecting AV equipment. About the Component Cable The projector cannot be connected to an AV equipment only with the supplied component cable (RCA/Mini D-sub 15-pin). Please - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 65
video output terminal (DVI terminal) LV-CA31 cable Commercial HDMI adapter cable Commercial DVI cable Input Terminal-2 (ANALOG IN-2) Projector Projector Input Terminal-1 (DIGITAL IN) INPUT Signal: Select [SCART] (P72) INPUT Signal: Select [DIGITAL VIDEO] (P71) z Set the input signal - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 66
MarkII/ X700 Projector Video input terminal (VIDEO IN) SX7 MarkII/ X700 Projector SX60 SX60 INPUT Signal: [S-VIDEO] is selected automatically INPUT Signal: [VIDEO] is selected automatically z Connect an audio cable if you want to use the projector's speaker. (SX7 II/X700: P67, SX60: P39) 66 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 67
PROJECTING AN IMAGE FROM AV EQUIPMENT Connecting to AUDIO IN Terminals (SX7 II/X700) Connect an audio cable to the AUDIO IN terminal corresponding to the input image signal if you want to use the projector's speaker. Audio cable AV equipment AUDIO OUT terminal (RCA terminal) (Stereo mini jack) - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 68
Connecting to AUDIO OUT Terminals (SX7 II/X700) Connect the audio cable between the AUDIO OUT signal corresponding to the selected image signal. (Stereo mini jack) Audio output terminal (AUDIO OUT) Projector SX7 MarkII/ X700 z Use an audio cable without a built-in resistor. Using an audio cable - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 69
on the projecting image. P55* z Select an appropriate screen mode from the [Aspect] menu. P73, 90, 91 Stopping projection... Turn off the projector. P60* z Turn off the projector and remove the power cord from the AC outlet. * Those steps are same as those for projecting the computer screen. 69 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 70
Performing the Auto Setup With the auto setup function, a series of screen adjustment and settings, such as Auto focus and Auto keystone is performed automatically when projecting a video image from an AV equipment. You can start the projection only with this operation if the input signal has been - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 71
< < PROJECTING AN IMAGE FROM AV EQUIPMENT < < Selecting DIGITAL VIDEO 1 Press the [INPUT] button. The [INPUT] window appears. 2 Select the top item in the menu with the [INPUT] button. The selection is toggled through available input signal types from above. z You can select any input signal - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 72
< < PROJECTING AN IMAGE FROM AV EQUIPMENT < < Selecting SCART z Select [SCART] for Input Terminal-2. 1 Press the [INPUT] button. The [INPUT] window appears. 2 Select the second top item in the menu with the [INPUT] button. The selection is toggled through available input signals from above. z - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 73
PROJECTING AN IMAGE FROM AV EQUIPMENT Selecting a Screen Mode (Aspect) You can select one of the following screen modes depending on the aspect ratio of your AV equipment or content software. z You can specify the aspect ratio from the menu. Refer to [Aspect] in the menu (P90, 91). z The available - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 74
(720p/1035i/1080i) DIGITAL VIDEO (720p/1080i) Wide z [Auto screen color] may not correct the screen color properly. If such is the case, correct it manually. (P98) 74 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 75
to the screen. z [Auto focus], [Auto keystone], and [Auto screen color] are disabled in the [Auto setup] func- tion. z You cannot register the image for [Projector on] or [No signal screen]. z [SPOT] will be disabled. PROJECTING AN IMAGE FROM AV EQUIPMENT 75 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 76
- Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 77
/Safety Instructions Before Use USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATION Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 78
while blackening out the image (SX60/X700) (P100). z The (middle) LED illumination lamp on the top control flash slowly while blackening out the image. z A guiding message appears if you press an invalid button while the NO SHOW function is on. The "FREEZE" message is shown on the screen. Canceling - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 79
Muting the Sound Adjusting the Volume The projector shows the [MUTE] icon on the screen. Volume bar appears on the screen. Canceling the MUTE function Press the button again to cancel the MUTE function. Pressing the button also cancels the MUTE function. z For SX7 MarkII/X700, you can also mute - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 80
Canceling the Countdown Press the button again to disappear the timer. z This function is available only if the projector and the computer are connected via the USB cable that came with your projector (P82). z This function acts as the Page Up and Page Down keys on the computer keyboard. You can - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 81
zoom ratio is 1x to 12x. z You can freeze the enlarged image. z Press the [OK] button to cancel the digital zoom function. z The following guiding message appears if you press an invalid button during operating the digital zoom function. Zooming Out an Image Press this button repeatedly until the - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 82
are turned off, and then connect the supplied USB cable between the USB terminals on the computer and the projector. z This function is supported on Windows 7, Windows Vista, Windows XP, or Mac OS 9.2 and later. Moving the Cursor USB terminal Computer You can move the mouse cursor vertically - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 83
center of the screen and the image becomes dark except for the spotlight. Press the button repeatedly to change the shape of the spotlight. No mark USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATION 83 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 84
- Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 85
UP FUNCTIONS FROM MENUS Table of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 86
. You can set them regardless of the input signal. * The menu items may differ depending on the input signal. The projector stores the settings for each input signal (8) and image mode (up to 5). Symbols Indicating Item Categories Menu items are classified into two categories, menu items - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 87
This section provides the basic operation on the menu. 1 Press the [MENU] button. A menu window appears. z Press the [MENU] button again to close the menu window. 2 Press [] to select the appropriate tab. Press [ ] to move the cursor on the tab if it is not on it. Image adjustment tab ( - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 88
[ ] to select a desired setting. z With a slider Example: Contrast z In a different screen Example: Menu position (SX7 MarkII) Press [] to move the slider. Press the [OK] button to display a different screen. Then follow the instruction on the screen. < SETTING UP FUNCTIONS FROM MENUS 88 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 89
SETTING UP FUNCTIONS FROM MENUS 5 Press the [OK] button. In some menu items, the setting is enabled just by making a selection. 6 Press the [MENU] button when you finish. The menu disappears. 89 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 90
Setting Display Status Selecting a Screen Mode (1) [Aspect] DIGITAL PC ANALOG PC You can adjust the aspect ratio of the image projected on the screen. Selecting a Screen Mode (2) [Aspect] DIGITAL VIDEO COMP. You can adjust the aspect ratio of the image projected on the screen. T Display - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 91
input signal type suitable for the computer from the displayed signal types. Press the [MENU] button when you finish. z See P132 for the signal types supported by this projector. SETTING UP FUNCTIONS FROM MENUS 91 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 92
the [Auto] mode. NTSC4.43 PAL-M PAL-N Press the [MENU] button when you finish. z Confirm the input signal type according to the User's Manual that came with the AV equipment connected. Auto 1080i 1035i 720p 575p Selects the component format automatically according to the input signal. Select - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 93
Setting Display Status Adjusting the Total Number of Dots [Total dots] ANALOG PC You can select the total number of dots in the horizontal direction. Adjust the number of dots when the image distorts or noise is displayed on the screen at both sides. Adjusting the Tracking [Tracking] ANALOG PC You - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 94
Adjusting the Horizontal Position [Horizontal position] ANALOG PC You can adjust the horizontal position of the screen when the projected image is shifted in the horizontal direction. Adjusting the Vertical Position [Vertical position] ANALOG PC You can adjust the vertical position of the screen - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 95
Setting Display Status Adjusting the Number of Horizontal Pixels [Horizontal pixels] ANALOG PC You can adjust the number of the pixels in the horizontal direction if the length of the screen is too long or too short in the horizontal direction. Adjusting the Number of Vertical Pixels [Vertical - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 96
Performing Progressive Processing [Progressive] COMP. VIDEO/S-VIDEO You can accumulate and composite information for a signal for a low resolution image to convert it to a high resolution image. Selecting a Menu Position [Menu position] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 97
the ceiling. The projected image is inverted in the vertical direction. Press the [MENU] button when you finish. Rear Rear, Ceiling mounted z When hanging the projector from the ceiling, make sure to use optional brackets. Contact your Canon dealer. z The keystone adjustment will be reset. 97 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 98
. Use this function if the [Greenboard] setting is inadequate. < If you manually adjust it, press [ ] or [ ] button to select red, green, z For projecting the captured logo on a screen, select [User logo] on the [Projector on], [No signal screen], or [NO SHOW] menu item. z You may not capture - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 99
PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can display a user logo on a screen when there is no input signal. (SX60/X700) For SX7 MarkII, you can display either of a black or blue screen. T Display settings T User screen settings T Logo position T Display settings T User screen settings T No - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 100
SX7 MarkII, you can display either of a black or blue screen. T Display settings T User screen settings T NO SHOW Selecting a Logo at Startup [Projector /X700) Canon logo Displays the Canon logo captured at the factory. Skip Projects an image immediately after turning on the projector. User - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 101
Selecting Aspect Ratio of the Screen [Screen aspect] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can select the aspect ratio of the projecting screen. T Display settings T Screen aspect 4:3 Select this when you use a screen with aspect ratio of 4:3. 16:9 Select this when - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 102
projecting image. T Image adjustment T Image mode Standard Presentation Movie Photo (SX7 MarkII) Select this to project an image with near-original quality and project an image shot by an sRGB-compatible digital camera. SX7 MarkII Standard Presentation Movie*1 Photo*2 AdobeRGB sRGB SX60 Standard - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 103
image. T Image adjustment T Brightness T Image adjustment T Contrast (SX7 MarkII) > Increases the brightness of an image. < Decreases the setting is saved for the currently selected input signal and image mode. (SX7 MarkII) > Increases the contrast of an image. The image becomes more - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 104
are obscure. T Image adjustment T Sharpness T Image adjustment T Gamma (SX7 MarkII) > Increases the sharpness of an image. < Decreases the setting is saved for the currently selected input signal and image mode. (SX7 MarkII) > Makes dark and obscure portions of an image visible. - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 105
Setting the Image Quality Making Color Adjustment (1) (SX7 II) [Color adjustment] DIGITAL PC ANALOG PC You can z If you change R/G/B Gain or Offset once color temperature has been specified, the "*" mark is displayed at the right side of the setting value to indicate the color temperature has been - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 106
Making Color Adjustment (3) [Color adjustment] COMP. VIDEO/S-VIDEO You can adjust color level and color balance and make color adjustment for each color (red, green, and blue). Making Advanced Color Adjustment (1) [Dynamic gamma] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 107
Setting the Image Quality Making Advanced Color Adjustment (2) [Mem. color correct] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can correct colors (e.g. blue sky) in our memory so that they can be projected more vividly. Making Advanced Color Adjustment (3) [6-axis color - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 108
Correcting the Image According to the Ambient Light (SX7 II) [Ambient light] DIGITAL PC ANALOG PC You can correct and project an image more appropriately according to the ambient light on the screen if you - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 109
/S-VIDEO You can reduce the lamp brightness if you want to make the image darker or reduce the fan noise. T Image adjustment T Lamp mode (SX7 MarkII) Normal Quiet Projects an image at the normal brightness level. Reduces the lamp brightness and the fan noise. Press the [OK] button to confirm - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 110
adjustment T Reset Performing [Color adjustment] or [Advanced adjustment]: A check mark ( ) appears on the Image Adjustment menu if you perform [Color OK] button to confirm, and then press the [MENU] button. z The projector stores the image settings for each input signal (8) and image mode (up to - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 111
VIDEO COMP./SCART VIDEO/S-VIDEO You can turn off the lamp or projector automatically for saving power. T System settings T Auto setup T that you can check which functions are enabled/disabled (P46, 70). z You can manually adjust each item. [Auto focus]: [FOCUS] button (P51) [Auto keystone]: [ - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 112
Skip the POWER Button Operation [Direct power on] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can set the projector to be turned on when you connect the power cord. Enabling/Disabling the Beep [Beep] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 113
Selecting a Display Language [Language] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can select a language to be used in the menu from 20 different languages. T System settings T Language Setting Various Function English Germany French Italian Spanish Portuguese Swedish Russian - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 114
] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can enable/disable the guide message showing how to use the projector. T System settings T Key lock T System settings T Guide SETTING UP FUNCTIONS FROM MENUS Off Main unit Disables the key lock function. Prohibits the use of - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 115
to confirm, and then press the [MENU] button. z This setting does not effect the POWER indicator or WARNING lamp. Ch1 Selects the channel on the projector you use. Ch2 Press the [OK] button to confirm, and then press the [MENU] button. Selecting a Channel on the Remote Control Press the [LIGHT - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 116
and then press the [MENU] button. z Refer to the User's Manual that came with the AV equipment for more detailed information on settings. Off is valid, projection starts. If you enter a wrong password three times, the projector will be turned off. z To cancel the password, remove the power plug - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 117
password] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can register a password that you need to enter when turning on the projector. Resetting to the Default Setting [Factory defaults] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can reset the menu item - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 118
/S-VIDEO You can reset the lamp counter that indicates the timing to replace the projector when you replace it. T System settings T Other settings T Lamp counter z more SETTING UP FUNCTIONS FROM MENUS z If the time of use is: SX7 MarkII/X700: 1800 to 2000 hours SX60: 2400 to 2500 hours z If - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 119
MAINTENANCE Table of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 120
z Never use volatile cleaning liquid or benzine, as these may damage the finish of the projector. When using a chemical dust cloth, make sure to read the instructions thoroughly. z When cleaning the projector's lens, use a commonly available air blower or lens cleaning paper. The lens surface is - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 121
air filter opening. You may suffer electric shock or injury due to the high-voltage parts or rotating parts. Cleaning the Air Filter Turn the projector upside down, remove the cover by pushing the latch, remove the air filter, and clean it with a vacuum cleaner. When cleaning dust off the side - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 122
the projector is turned on. z If the time of use is: SX7 the time of use is: SX7 MarkII/X700 : 2000 hours or projector, wait until the cooling fan stops, remove the power plug from the AC outlet, and let the projector the projector is turned projector uses the following lamp. Lamp type No. SX7 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 123
* After the installation, be sure to push down the handle. Screw Lamp 5 Replace the lamp cover and tighten the screw. 6 Turn on the projector. 7 Bring up the menu and select [System set- tings] -> [Other settings] -> [Lamp counter] (P118). 8 Select [Reset] -> [OK] to reset the lamp counter. Lamp - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 124
- Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 125
TROUBLESHOOTING Table of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 126
Troubleshooting WARNING Lamp Flash Patterns The WARNING lamp on the Control Panel flashes in red after the projector is turned off when there is a trouble in the projector. z Wait until the cooling fan stops and disconnect the power plug from the AC outlet before dealing with the trouble. Flash - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 127
POWER] button again off. (P60). The safety device has activated because you put the projector in the carrying bag during the cooling fan was rotating. You cannot release the safety due to the prob- Turn on the projector and computer in this order again. lem in the computer. TROUBLESHOOTING 127 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 128
high-temperature place, condensation may form on the lens. The condensation will evaporate a while later and the projector will be able to project a normal image. The lens is stained. Clean up the lens (P120 . the [Image flip H/V] setting in the [Display settings] menu (P97). TROUBLESHOOTING 128 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 129
manufacturers. For more detailed information, refer to the User's Manual that came with your computer. The projector is forced to be turned off. Cause Countermeasure The air is 5 to 35°C (P15). propriate. Other reasons The projector may be damaged. Contact your dealer. TROUBLESHOOTING 129 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 130
set- been changed. You can check the [Remote control] setting in ting of the projector. the [System settings] menu (P115). The key lock function is prohibiting Check whether recognized due Turn on the projector and computer in this order again. to a problem in the computer. TROUBLESHOOTING 130 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 131
Menu Configuration P144 Table of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 132
frequency (KHz) 31.469 37.879 48.363 63.981 63.981 * Only for SX7 MarkII/SX60 Vertical frequency (Hz) 59.94 60.32 60.00 60.02 60.02 the table above are subject to change without prior notice. - This projector does not support any computer signal of which dot clock is 170MHz or higher. - - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 133
Relationship between Screen Size and Projecting Distance Screen size at 4:3 aspect ratio Type - W x D (cm) 40" 81 x 61 50" 102 x 76 60" 122 x 91 70" 142 x 107 80" 163 x 122 90" 183 x 137 100" 203 x 152 110" 224 x 168 120" 244 x 183 130" 264 x 198 140" 284 x 213 150" 305 x 229 160" 325 x 244 170" - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 134
an image with more accurate color reproduction since Its has wider color gamut than sRGB. In SX7 MarkII, if you select [AdobeRGB] in the [Image mode] setting, the projector can project the best-quality image conforming to the AdobeRGB Standard. Please be aware that color of the projected image - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 135
gamma correction function works effectively when portions of an image are obscure because they are too light or dark. This projector supports manual gamma correction and dynamic gamma correction which performs the gamma correction automatically. HDCP An abbreviation of High-bandwidth Digital Content - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 136
) An international standard of color representation (color space) which is applied to general digital cameras, displays and others. In this projector, if you select [sRGB] in the [Image mode] setting, the projector can project the best-quality image conforming to the sRGB Standard. APPENDIX 136 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 137
used to send a brightness signal (Y) and color signal (C) separately. Connect the S-video terminal on the AV equipment and the S-VIDEO IN terminal on this projector with an S-video cable. Select [S-VIDEO] at projection. Tracking (P93) To reproduce an image from an analog image signal, the process to - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 138
Projector device Model name Display system Optical system Type Size/Aspect rat Drive system Number of pixels/ Total Number of pixels SX7 AUDIO IN terminal USB terminal SERVICE PORT Video Output terminal Audio , lens cover, string for lens cover, User's Manual and Warranty Card. * 99.99% or more of - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 139
External View APPENDIX Screw Holes for installation of ceilingmount hanger (M4 x 6) Input terminal-2 (ANALOG IN-2) (Analog PC-2 input/component input terminal) This terminal is used as a computer analog PC input or component input terminal. Use a Dsub computer cable for connection. Mini D-sub 15 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 140
Ceiling mounted 33, 97 Channel setting 115 Color adjustment 105 Color temperature (SX7 MarkII 105 Component 64, 135 Composite 135 Contrast 103 D D.ZOOM 81 51 FREEZE 78 G Gain 105, 135 Gamma correction 104, 135 Guide 114 H HDCP 135 HDMI 65, 136 Horizontal pixels 95 Horizontal position - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 141
settings 116 POWER indicator 28 Power management 61 Power management mode (setting) ..... 111 Progressive 96, 136 Projection distance 32, 133 Projector installation 14, 33 Projector on 100 P-TIMER 80 R Rear projection 33, 97 Register password 117 Remote control 24, 29, 115 Reset 110, 117 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 142
Options z Replacement lamp Part No.: SX7 MarkII/X700: RS-LP04 SX60: RS-LP03 z Ceiling-mount hanger RS-NA01 (SX60/X700) * This part is used to hang the projector from a ceiling. For more detailed information, refer to the instruction manual that comes with the ceiling-mount hanger RS-CL07. 142 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 143
143 - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 144
screen P92 NO SHOW Projector on P92 Return Screen aspect Black P99 Blue * User logo (SX60/X700) Black * P100 Blue User logo (SX60/X700) Canon logo * P100 Skip if you have selected [Photo] for [Image mode]. ***SX7 II: It is available if the input signal is [DIGITAL VIDEO], [COMPONENT], [ - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 145
Off * P107 Adjust Hue/Saturation Return DIGITAL PC/ANALOG PC Ambient light** (SX7 II) Off Adjust P108 Type Tungsten Fluorescent Fluorescent H Level L M H Lamp mode Russian Chinese Dutch (Traditional) Finnish Korean Norwegian Japanese Guide Off On * P114 LED illumination Off On * - Canon REALiS SX7 Mark II | Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 146
, Lake Success, NY 110421198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada
MULTIMEDIA PROJECTOR
Table of contents/Safety Instructions
Before Use
Setting Up the Projector
Projecting an Image from the Computer
Projecting an Image from AV Equipment
Useful Functions Available During a Presentation
Setting Up Functions from Menus
Maintenance
Troubleshooting
Appendix
Index
User’s Manual
ENG