Canon REALiS SX7 Mark II Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 123
Replace the lamp cover and tighten the, Fully insert a new lamp and secure it with two
View all Canon REALiS SX7 Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Replacing the Lamp 1 Turn off the projector, disconnect the power plug from the AC outlet, and then let the projector stand for at least 1 hour. 2 Loosen a screw with a flathead screwdriver and remove the lamp cover. Lamp cover Screw 3 Loosen two screws, pull up the handle, and then remove the lamp. Handle 4 Fully insert a new lamp and secure it with two screws. * After the installation, be sure to push down the handle. Screw Lamp 5 Replace the lamp cover and tighten the screw. 6 Turn on the projector. 7 Bring up the menu and select [System set- tings] -> [Other settings] -> [Lamp counter] (P118). 8 Select [Reset] -> [OK] to reset the lamp counter. Lamp cover MAINTENANCE 123
123
MAINTENANCE
Replacing the Lamp
1
Turn off the projector, disconnect the power
plug from the AC outlet, and then let the pro-
jector stand for at least 1 hour.
2
Loosen a screw with a flathead screwdriver
and remove the lamp cover.
3
Loosen two screws, pull up the handle, and
then remove the lamp.
4
Fully insert a new lamp and secure it with two
screws.
*
After the installation, be sure to push down
the handle.
5
Replace the lamp cover and tighten the
screw.
6
Turn on the projector.
7
Bring up the menu and select [System set-
tings] -> [Other settings] -> [Lamp counter]
(P118).
8
Select [Reset] -> [OK] to reset the lamp
counter.
Lamp cover
Screw
Screw
Lamp
Handle
Lamp cover