Canon REALiS SX7 Mark II Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 61
Setting Up the Power Management Function, cooled down
![]() |
View all Canon REALiS SX7 Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
PROJECTING AN IMAGE FROM THE COMPUTER z Wait until the cooling fan stops before putting the projector in the carrying bag. Do not put the projector in the carrying bag until the cooling fan stops rotating. The projector may be damaged due to the heat. z Attach the lens cap to the lens to protect it and put the projector in the carrying bag. Replace the adjustable foot to prevent the damage on the projector. z You can carry the projector immediately after the use ("Off & Go" function). z You can turn off the projector by disconnecting the power cord without pressing the [POWER] button. z The LED illumination lamp turns on to indicate the lamp is being cooled when the power cord is connected. Setting Up the Power Management Function You can use the power management function that turns off the lamp if the projector receives no signal input for a while. If you enable the power management mode, the projector displays a countdown timer if the projector is receiving no signal input and is not operated for 30 seconds, and approximately 5 minutes later the lamp is turned off and the projector goes into the power management mode. You can select one of the following power management modes from the menu (P111). Standby mode Select this mode if you want to start projection soon. In the standby mode, the lamp is turned off and cooled down. When the lamp has been cooled down, the [POWER] indicator starts flashing in red and green to indicate it is standby. It will start projection if the input signal is inputted or any button on the top control or remote control is pressed. Exit mode Select this mode to turn off the projector automatically. In the exit mode, the lamp is turned off and cooled down. When the lamp has been cooled down, the [POWER] indicator stops flashing in red and stays on and the power is turned off. z The projector becomes inoperative when the lamp is being cooled in a power management mode. 61
![](/manual_guide/products/canon-realis-sx7-mark-ii-multimedia-projector-sx7-markiisx60x700-users-manual-d04de7a/61.png)