Canon REALiS SX7 Mark II Multimedia Projector SX7 MarkII/SX60/X700 User's Manu - Page 15
Do Not Use in the Following Environments, Using the Projector at 2300 Meters or More Above Sea Level
![]() |
View all Canon REALiS SX7 Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
SAFETY INSTRUCTIONS Caution When placing the projector on a castered stand or table, be sure to lock the casters. z Failure to do so may cause the projector to move or topple, resulting in an injury. Position the projector in a horizontal position. Incorrect installation may cause troubles and accidents. z Do not tilt the projector more than 20 degrees above and below the horizontal. z When you want to use your projector 20° pointing up or down, make sure to place 20° the projector straight up or down. Do Not Use in the Following Environments z Do not place the projector on an unstable or slanted surface. The projector may fall causing a personal injury. z Do not place it in an oily, smoky, or damp location (e.g., near a cooking table or a humidifier). It may cause a fire or an electric shock. z Place the projector with a minimum distance of 1 m (3.3') from its left, right, rear, and top panels to the neighboring object such as a wall. Otherwise, it may damage the projector due to bad exhaust ventilation. z Do not put anything near the exhaust vent that may deform or deteriorate due to heat. z Do not install the projector in a humid or dusty location or a position where there is a lot of oily or cigarette smoke. Optical parts such as a lens and mirror may be stained, resulting in poor picture quality. z Do not place it near an exhaust outlet of air-conditioning equipment. Otherwise, it may be damaged. If the projector is carried from a cold place to a warm place or the room temperature is raised rapidly, condensation may form on the lens and mirror due to the moisture in the atmosphere, resulting in a blurred picture. Wait until condensation evaporates and normal picture is shown. Do not use the projector in a place subject to either very high or very low temperatures. Doing so may cause malfunction. The ranges of the operating and storage temperatures are as shown below: Operating temperature: +5°C to +35°C (Humidity: 85% or below) Storage temperature: -10°C to +60°C (Humidity: 90% or below) Using the Projector at 2300 Meters or More Above Sea Level z If you use the projector at 2300 meters or more above sea level, the special configuration is required to cool down the projector properly. Contact your dealer. 15
![](/manual_guide/products/canon-realis-sx7-mark-ii-multimedia-projector-sx7-markiisx60x700-users-manual-d04de7a/15.png)