Canon REALiS SX80 Mark II REALiS SX80 Mark II User Manual - Page 85
Select HDMI Over Scan (SX80 II), Performing Progressive Processing, SX80 II], [COMPONENT], [VIDEO] or
UPC - 660685017801
View all Canon REALiS SX80 Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Select HDMI Over Scan (SX80 II) [HDMI over scan] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Display settings HDMI over scan You can select this as required when you project visual software with the HDMI signals. Setting Display Status Performing Progressive Processing [Progressive] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Display settings Progressive You can select this as required when the images have low resolution. Setting Up Functions from Menus Off The entire input signals (100%) are projected. The images projected may be smaller than the full projection screen. On Images are projected with disorders at their peripheral section of images trimmed off. (The central 95% of the images are projected.) A part of peripheral sections of images may be cut out depending on the resolution of the signals. In such a case, select [Off]. Press the OK button to accept your setting and then press the MENU button. • [On] is the factory default. Off On Auto Do not perform the progressive processing. Performs the progressive processing. This mode is available when the HDMI signal is 1080i or, VIDEO/SVIDEO or COMPONENT signal is 1080i, 1035i, 576i, or 480i. Performs the appropriate progressive processing according to the input signal. Press the OK button to accept your setting and then press the MENU button. • [Auto] is the factory default. • You can set this mode for either [HDMI (SX80 II)], [COMPONENT], [VIDEO] or [S- VIDEO (SX80 II)]. • Select [Off] when flickers and horizontal lines are noticeable on a fast-moving picture. • For the details of the progressive processing, refer to the page 154. 85