Canon S3IS PowerShot S3 IS Camera User Guide Advanced - Page 126
Subject in recorded image is too bright, or image flashes white., Image contains noise., White dots
UPC - 013803063998
View all Canon S3IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Subject in recorded image is too bright, or image flashes white. Subject is too close, making the z Shoot within correct shooting distance of the flash too strong. subject when using the internal flash (p. 147). Subject is over exposed due to the surrounding area being too dark. z Set the exposure compensation to a negative (-) setting (p. 75). z Use the AE lock or the spot metering function (pp. 70, 73). Light is shining directly on the subject or reflected off the subject into the camera. z Change the shooting angle. Flash is set to on. z Push down the flash to off (Flash off) (Basic Guide p. 11). Image contains noise. ISO speed is too high. z Selecting high ISO speeds or (High ISO Auto) may increase the amount of noise in an image. When picture quality is the priority, select lower ISO speeds (p. 69). z In , , and modes of Special Scene mode, the ISO speed increases and noise may occur. White dots appear on the image. Light from the flash has reflected off dust particles or insects in the air. When shooting at the maximum wide angle. z This is a phenomenon that occurs with digital cameras and does not constitute a malfunction. Eyes appear red. Light reflecting back from eyes can make them appear red when the flash is used in dark areas. z Under these conditions, use the red-eye reduction mode (Basic Guide p. 11). For this mode to be effective, the subject must be looking right at the red-eye reduction lamp. Try asking them to look directly at the lamp. z Even better results can be obtained by increasing the lighting in indoor settings or approaching closer to the subject. 124