Canon S3IS PowerShot S3 IS Camera User Guide Advanced - Page 25

Before Using the Camera - Operations z Information for images shot on other cameras may not display correctly. z Overexposure Warning In the following cases, overexposed portions of the image blink. - When reviewing an image right after shooting in the LCD monitor (information view) or in the viewfinder (information view) - When using the detailed display mode of the Playback mode Power Saving Function This camera is equipped with a power saving function. The power will shut off in the following circumstances. Press the power button again to restore power. Shooting Mode Powers down approximately 3 minutes after the last control is input on the camera. [Display Off] activates and the LCD (or viewfinder) automatically turns off 1 minute* after the last control is input, even if [Auto Power Down] is set to [Off]. (To turn the LCD monitor back on, press any button other than the OFF button, or change the vertical or horizontal orientation.) Playback Mode or Powers down approximately 5 minutes after the last control is Connected to a Printer input on the camera. * Default setting (time can be changed). z Please note that when the power is turned off with the power saving function, small amounts of power are still consumed. z The power saving function does not activate during automatic slide show playback or while the camera is connected to a computer. z The power saving function settings can be changed (p. 31). 23