Canon SELPHY CP910 Blue User Guide - Page 10

• Do not touch the springs on the paper cassette. Accidentally bending the springs may prevent efficient paper feeding. • Note that one spring is attached in the center on the top of card-size paper cassettes. • Avoid touching or rubbing the glossy, printing side of the paper. Do not handle paper with wet hands, and keep paper free of dust. Dirt or moisture may cause banding or affect print quality, or damage the printer (=4). Loading the Cassettes 1 Open the covers. zzOpen the ink and paper compartment covers. 2 Load the ink cassette. zzInsert the ink cassette into the printer in the direction of the arrow on the cassette until it clicks into place. zzClose the ink cassette compartment cover. 3 Load the paper cassette. zzMaking sure the outer cover is open (=9), insert the paper cassette all the way into the compartment. Installing and Plugging in SELPHY More than length of paper Minimum 10 cm (4 in.) Minimum 10 cm (4 in.) 1 Choose the right place to put SELPHY. zzPlace the printer on a table or other flat, stable surface. Never place the printer on an unstable or tilted surface. zzKeep the printer away from sources of electromagnetism or strong magnetism. zzLeave at least 10 cm (4 in.) of open space around the printer. zzLeave more open space behind the printer than the length of paper used, so that the paper can pass in and out of the printer freely when printing. 2 Plug the adapter cord into SELPHY. zzInsert the adapter plug fully into the power inlet on SELPHY. Cover Contents Part Names Basic Operations Print Settings Printing via Wi-Fi Printing via USB Cable 3 Connect the power cord. zzConnect the power cord to the compact power adapter, and then plug the other end into a power outlet. Troubleshooting Appendix 10