Canon VB-M50 User Manual - Page 18

1 Click on the toolbar. A message appears for confirming whether or not to add the detected camera. 2 Click [Yes]. All the cameras that were automatically detected are added to the camera list. If you try to add a new detected camera to the list, making the number of cameras on the list exceed the maximum of 64, an error message will appear. If a camera could not be added to the list because the maximum number was exceeded, will remain green. When you carry out , the detection status is cleared and the button changes back to . Note A maximum of 64 cameras can be added to the camera list. If the maximum number (64) is exceeded when you try to add cameras, no camera can be added until one or more cameras are deleted from the camera list (P. 23). Registering the Administrator Account The administrator account can be registered for cameras with [Admin Required] displayed for [Connection Status] in the camera list. Note For cameras with the [Connection Status] set to [Admin Required] in the camera list, you can use their basic settings and advanced settings only after registering an administrator account for them. 1 Select a camera whose [Connection Status] is [Admin Required] in the camera list. Note If you select multiple cameras here, the same [Administrator Name] and [Administrator Password] are set to all of them. 2 Select [Camera Settings] > [Register Administrator Account]. Alternatively, you can double-click [Admin Required] for [Connection Status]. The [Register Administrator Account] dialog box is displayed. (1) (2) (3) (1) [Administrator Name] Enter the administrator name using alphanumeric characters, hyphens "-" , and underscores "_". (2) [Administrator Password] Enter the administrator password. (3) [Confirm Administrator Password] Enter the administrator password again for confirmation. 3 Click [OK]. The administrator account is registered, and the camera restarts. 18