Canon VB-M50 User Manual - Page 35

Detecting/Setting Cameras Accessing Camera Tools 2 You can access Camera Angle Setting Tool and admin tools from this tool. This operation can only be done with one camera at a time. Important When the security level for internet sites and intranet sites is set to [High] in Internet Explorer, it is necessary to add the IP address of the camera to the list of trusted sites (P. 33). Note The tools in the [Tools] menu that are not supported by the selected camera will appear grayed out. The tools may be included in a Setting Page or as software that must be installed to the computer, depending on the camera model. If they are included in a Setting Page, the corresponding Setting Page is displayed after entering the administrator account when you click a tool in the [Tools] menu. If they are included as software installed to the computer, the corresponding software starts. Launching Camera Angle Setting Tool Camera Angle Setting Tool allows you to set the camera from a computer after installing a camera or changing a camera's location. When setting the camera angle for an installed camera, you can launch Camera Angle Setting Tool from this tool. 1 In the camera list, select the camera for setting the camera angle. 2 Select [Tools] > [Camera Angle Setting Tool]. A message appears for confirming whether or not to launch Camera Angle Setting Tool. 3 Click [Yes]. For details on setting the camera angle, please refer to the camera's "Operation Guide". Note • An old version of Camera Angle Setting Tool that must be installed to the computer cannot be launched. Install v4.0 or a later version of Camera Angle Setting Tool. For details on installation, please refer to the camera's "Operation Guide". • Even if you click [No] in step 3, Camera Angle Setting Tool will launch but it will not connect to any camera. You need to connect to a camera again with Camera Angle Setting Tool. Launching Admin Tools When actually using a camera, the camera Admin Tools can be used to configure various operation settings. The Admin Tools of the selected cameras can be launched from this tool. 1 In the camera list, select the camera to launch and be configured by Admin Tools. 2 Click [Tools] to choose which tool to launch. You can select any of the following tools. • Privacy Mask Setting Tool • Panorama Creation Tool • View Restriction Setting Tool • Preset Setting Tool • Intelligent Function Setting Tool • Log Viewer • Recorded Video Utility When you select a tool, the selected tool dialog box appears. For details on how to configure settings using Admin Tools, please refer to the camera's "Operation Guide". 35