Canon VB-M720F Network Video Recording Software RM Series Administrator s Manu - Page 106

Use the Pan/Tilt/Zoom Feature „ Use the Pan/Tilt/Zoom Feature in the [Camera Control] Dialog Box You can use the pan/tilt/zoom feature in the [Camera Control] dialog box after getting control of the camera. (1) (2) Zoom is unavailable when the camera's digital zoom is set to [Disable]. Pan/tilt/zoom is unavailable if a fixed camera or an external camera, such as the VC-C50i, is used. Change the Camera Angle to a Preset Position You can select a preset camera angle in the [Camera Control] dialog box after getting control of a camera. (1) Camera angle control buttons Change the camera angle by clicking the buttons. Click in the center to point the camera to the front. (2) Zoom slider Drag the slider to change the zoom position. Drag the slider up to move toward the telephoto position and down to move toward the wide-angle position. „ Use Pan/Tilt/Zoom from the Video Window You can also use the pan/tilt/zoom feature from the video window. [Select Preset] is unavailable. Note You must first configure the presets on the camera before using this feature. For details, see the camera manual. (1) (2) (1) Display area Drag on the area to change the camera angle. Click on the area to move the camera angle to that point. If the view does not center on the desired location the first time, keep clicking the location until it centers. (2) Zoom slider Change the zoom position using the slider or [+]/[-]. Click [+] or drag the slider up to move toward the telephoto position. Click [-] or drag the slider down to move toward the wide-angle position. 106