Canon VB-M720F Network Video Recording Software RM Series Administrator s Manu - Page 74
Switch Between Layouts, Con a Layout Sequence
View all Canon VB-M720F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Property Operator for the decision Storage is Server Group isn't Status The name of Storage Server Group to which the Viewer is connected. Select [All of the following are met] to display only cameras that meet all the criteria. Select [Any of the following are met] to display cameras that meet any of the criteria. (3) [When conditions are not met, continue displaying cameras for] Specify how long a video window in the layout will remain displayed when it does not match the criteria specified here. (4) [OK] and [Cancel] Close the dialog box. 3 Click [OK] to close the dialog box. 4 Click [File] > [Save Layout]. 5 Change the layout name as required and click [OK]. Note The maximum number of dynamic layout video windows that can be displayed is 25. Switch Between Layouts 1 Click [Layouts] on the toolbar to display a menu for selecting existing layouts. 2 Select a layout. The menu is separated into two sub-menus: • Shared layouts Displays shared layouts under the name of the Storage Server Group. The [Layouts] menu shows the Storage Server Groups. All users have access to the layouts, however, only the administrator can make changes to them. • User layouts Displays layouts created by the currently logged in user. These layouts are not available to other users. Configure a Layout Sequence 1 Click [Layouts] > [New Layout Sequence] to display the [New Layout Sequence] dialog box. 2 Specify the layouts to be displayed in the sequence. (1) (2) (3) (8) (4) (5)(6)(7) (9) (1) [Sequence Name] Enter the name of layout sequence. (2) [Type] Specify the type of layout sequence. (3) [Available Layouts] Displays a list of available layouts. (4) [Add Layout] Add the selected layout to the [Sequence Layouts] list. (5) [Move Up] and [Move Down] Move the selected layout up or down in the list to change the sequence order. (6) [Remove Layout] Remove a layout from the list. (7) [Sequence Layouts] Displays a list of layouts in the order of the layout sequence. (8) [Interval] Specify the display time of each layout in the sequence, from 5 to 9999 seconds. (9) [OK] and [Cancel] Close the dialog box. 74