Canon VB-S30D Mark II Network Camera Operation Guide - Page 230

S311 Working error in external input/output service [err] Description %1 %2 %3 Meaning Countermeasure cannot work extio [%1][%2][%3] (S311) Error number Cause of error Error information An error occurred while the external input/output device service was running. If the problem persists after rebooting, the camera is faulty. Arrange for servicing. S312 Working error in timer service [err] Description cannot work timer [%1][%2][%3] (S312) %1 Error number %2 Cause of error %3 Error information Meaning Countermeasure An internal error occurred in the timer service. If the problem persists after rebooting, the camera is faulty. Arrange for servicing. S320 PAN/TILT operation error [err] Description %1 error occurred. [%2] (S320) %1 PAN | TILT %2 Meaning Warning details An error occurred during operation or stopping of PAN/TILT. Countermeasure Check that the camera is not touching the dome, etc. If the error is not caused by problems such as contact with peripheral items, the camera is faulty. Arrange for servicing. S410 Event service initialization error [crit] Description %1 event initialization error [%1][%2] (S410) Error number %2 Meaning Cause of error An error occurred in the initialization of the event service. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. S411 External input/output service initialization error [crit] Description %1 %2 Meaning Countermeasure extio initialization error [%1][%2] (S411) Error number Cause of error An error occurred in the initialization of the external input/output device service. If the problem persists after rebooting, the camera is faulty. Arrange for servicing. S412 Timer service initialization error [crit] Description %1 %2 Meaning Countermeasure timer initialization error [%1][%2] (S412) Error number Cause of error An error occurred in the initialization of the timer service. If the problem persists after rebooting, the camera is faulty. Arrange for servicing. S413 Timer service runtime error [crit] Description timer working error [%1] (S413) %1 Meaning Countermeasure Error number An error occurred while the timer service was running. If the problem persists after rebooting, the camera is faulty. Arrange for servicing. S420 External IO controller has failed [crit] Description external io controller is broken.(S420) Meaning The external IO controller has failed. Countermeasure The external IO controller firmware must be updated. If the problem persists after updating the firmware, the camera is faulty. Arrange for servicing. 212