Canon VIXIA HG10 HG10 Instruction Manual - Page 97
Direct Print Related Messages
View all Canon VIXIA HG10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Message Explanation CARD ERROR A memory card error occurred. The camcorder cannot record or display the 76 image. If after the message disappears appears in red, perform the following: Turn off the camcorder; remove and reinsert the memory card and set the camcorder back to mode. If turns back to green you can resume recording/playback. Otherwise, initialize the memory card. (Doing so will erase all the still images on the memory card.) CARD FULL Memory card is full. Erase some images to free some space or replace the 69 memory card. THE CAMCORDER IS SET TO STILL You pressed START/STOP while recording still images ( IMAGE MODE mode). - NAMING ERROR The folder and file numbers have reached their maximum value. Set the - [FILE NOS.] option to [RESET] and erase all the images on the memory card or initialize it. TRANSFER ORDER ERROR You attempted to set more than 998 transfer orders. Reduce the number of 90 still images marked with transfer orders. TOO MANY STILL IMAGES DISCONNECT USB CABLE Disconnect the USB cable and decrease the number of still images on the - memory card to fewer than 1,800. If a dialog appeared on the computer screen, close it and then reconnect the USB cable. WHILE THE CAMCORDER IS When the camcorder is in mode and is connected to the - CONNECTED TO A PC DO NOT computer with a USB cable, the camcorder cannot be operated. Disconnecting DISCONNECT THE USB CABLE OR the USB cable or power source while this message appears may result in hard POWER SOURCE disk damage. Use the computer to end the connection before disconnecting the cable. CANNOT TURN OFF POWER OR CHANGE MODES CONNECT THE COMPACT POWER When the camcorder is in mode and is connected to the - ADAPTER computer, this message will appear if the camcorder is being powered by the battery pack. Connect the compact power adapter to the camcorder. BACK UP RECORDINGS REGULARLY This message may appear when you turn on the camcorder. In the event of a 40 malfunction, recordings may be lost so back up your recordings regularly. Direct Print Related Messages About Canon PIXMA/SELPHY DS Printers: If the printer's error indicator flashes or an error message appears on the printer's operation panel, refer to the printer's instruction manual. Message PAPER ERROR NO PAPER Explanation There is a problem with the paper. The paper is not correctly loaded or the paper size is wrong. Alternatively, if the paper output tray is closed, open it to print. Paper is not correctly inserted or there is no paper. 97