Canon XF105 XF100 / XF105 Instruction Manual - Page 33
Removing and Attaching the Terminal Covers, Using the Wireless Controller - hd camcorder
View all Canon XF105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Removing and Attaching the Terminal Covers Remove the covers for the following terminals in order to access them. • HD/SD SDI and GENLOCK/TC terminals* • W (headphone), AV and DC IN terminals • REMOTE terminal • HD/SD COMPONENT OUT, USB and HDMI OUT terminals * b only. Removing the Terminal Covers 1 Open the terminal cover. 2 Grasp the strip connecting the terminal cover to the camcorder and pull straight out. Preparing the Camcorder 33 Attaching the Terminal Covers Insert the connecting strip into the opening to attach the terminal cover. NOTES • If the connecting strip is difficult to grasp, use a pair of tweezers or similar tool. Using the Wireless Controller Inserting the Battery Insert the supplied CR2025 lithium button battery into the wireless controller before use. 1 Press the tab in the direction of the arrow (ቢ) and pull out the battery holder (ባ). 2 Place the lithium button battery with the + side facing up (ቤ). 3 Insert the battery holder (ብ). ቤ ባ ብ ቢ Activating the Wireless Controller By default, the wireless controller is activated. If it has been deactivated, follow the procedure below to activate it. Operating modes: 1 Open the [Wireless Controller] submenu. [J Other Functions] [Wireless Controller] 2 Select [On] and then press SET. [J Other Functions] [Wireless Controller] [On] NOTES • You can also activate the wireless controller by setting an assignable button to [Wireless Controller] (0 97).