Canon XF105 XF100 / XF105 Instruction Manual - Page 40
Recording - test
View all Canon XF105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
3 Recording 40 Recording Video This section explains the recording basics. Before you begin recording, make a test recording first to check if the camcorder operates correctly. Record for approximately 6 minutes at 50 Mbps (0 46). Should the camcorder fail to operate correctly, refer to Troubleshooting (0 162). For details on recording audio, refer to Recording Audio (0 77). Operating modes: Preparing to Record 1 Attach a charged battery pack to the camcorder (0 23). 2 Insert a CF card into a CF card slot (0 35). • Insert another CF card into the other CF card slot to use relay recording (0 39) or double slot recording (0 39). 3 Remove the lens cap. 4 Adjust the viewfinder. Lens cap Viewfinder NOTES • The camcorder can add a user memo (0 82) to a clip as you record. It can be used to store information such as the clip name, camera operator and filming location. However, you must set the user memo before recording. • You can attach commercially available accessories to the handle by using the socket for 1/4" mounting screws. Recording 1 Hold down the button on the d switch and move it to CAMERA. • The camcorder turns on in mode and enters record pause mode. • The access indicator for the CF card slot selected for recording illuminates in red and then changes to green.