Canon XF105 XF100 / XF105 Instruction Manual - Page 96
Using the Focal Length Guide
View all Canon XF105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Using the Focal Length Guide Using the Focal Length Guide The focal length guide aids you when using two camcorders for 3D recording. The guide appears as a numerical value and has a range of 154 steps. You can set the guide to 0 at any point in the zoom range to help precisely 96 calibrate both camcorders. Operating modes: 1 Set up two camcorders and align their picture angle. 2 Open the [Focal Length Guide] submenu. [l Camera Setup] [l Camera Setup] [Zoom] [Focal Length Guide] [Zoom] 3 Select [Set To 0] and then press SET. • The focal length guide appears on the left side of the screen as [z ±0]. To turn off the indicator, select [Off] instead. [Focal Length Guide] • You can obtain more accurate results by performing this step at full telephoto. • If both camcorders are set so that the same value is displayed during zoom, the focal length for both camcorders will be maintained. NOTES • Although the focal length guide is an aid for 3D recording, make sure to check the picture angle visually while recording.