Canon iP6600D iP6600D Direct Printing Guide - Page 65

See Replacing an Ink Tank - ink refill

Get Canon iP6600D - PIXMA Color Inkjet Printer PDF manuals and user guides
UPC - 013803048889
View all Canon iP6600D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

Message The remaining level of the following ink cannot be correctly detected. U130 The following ink tank cannot be recognized. U140 U043 The following ink tank cannot be recognized. U150 Error code Try This An ink tank that was once empty is installed. Replace the ink tank. Printing under the situation may damage the Print Head. Canon shall not be liable for any printer malfunction or damage caused by refilled ink tanks. If you want to continue printing with the refilled ink tank installed, press and hold the Stop/Reset button for at least five seconds, and then release it. Using refilled ink tanks is memorized. * This operation will release the function for detecting the remaining ink level. Possible causes are as follows: • The ink tank may not be installed properly (The lamp on the ink tank is off). Install the appropriate ink tank. • The ink tank may not be compatible with this printer (The lamp on the ink tank is off). Install the appropriate ink tank. See "Replacing an Ink Tank" on page 50. Ink tank errors have occurred (The lamp on the ink tank is off). Replace the ink tank. See "Replacing an Ink Tank" on page 50. An error that requires contacting the Customer Care Center may have occurred. (POWER lamp and Alarm lamp flash alternately.) Disconnect the printer cable from the printer, and then turn the printer off and unplug the printer from the power supply. Plug the printer back in and turn the printer back on after leaving it for a while. If the problem remains, contact the Customer Care Center. 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
61
The remaining level of the
following ink cannot be correctly
detected.
U130
An ink tank that was once empty is installed.
Replace the ink tank.
Printing under the situation may damage the Print Head. Canon shall not be liable
for any printer malfunction or damage caused by refilled ink tanks.
If you want to continue printing with the refilled ink tank installed, press and hold
the Stop/Reset
Stop/Reset
Stop/Reset
Stop/Reset button for at least five seconds, and then release it. Using refilled
ink tanks is memorized.
* This operation will release the function for detecting the remaining ink level.
The following ink tank cannot be
recognized.
U140
U043
Possible causes are as follows:
• The ink tank may not be installed properly (The lamp on the ink tank is off).
Install the appropriate ink tank.
• The ink tank may not be compatible with this printer (The lamp on the ink tank is
off).
Install the appropriate ink tank.
See “Replacing an Ink Tank” on page 50.
The following ink tank cannot be
recognized.
U150
Ink tank errors have occurred (The lamp on the ink tank is off).
Replace the ink tank.
See “Replacing an Ink Tank” on page 50.
Error code
An error that requires contacting the Customer Care Center may have occurred.
(POWER
POWER
POWER
POWER lamp and Alarm
Alarm
Alarm
Alarm lamp flash alternately.)
Disconnect the printer cable from the printer, and then turn the printer off and
unplug the printer from the power supply. Plug the printer back in and turn the
printer back on after leaving it for a while.
If the problem remains, contact the Customer Care Center.
Message
Try This