Canon imageCLASS D680 imageCLASS D680 Reference Guide - Page 15
Energy Saver Mode
View all Canon imageCLASS D680 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Energy Saver Mode This machine provides an energy saver function. When no operations are performed for about 5 minutes, the machine automatically enters the energy saver mode. • The time until the machine enters the energy saver mode can be specified in the range from 3 minutes NOTE to 30 minutes. You can also turn off the energy saver function. (→ p. 7-4) • The energy saver function does not activate when the machine is in the following status: - When printing out copies or faxes* or other pages - When sending or receiving faxes* - While a copy job is saved in memory or when the reserve copy or other functions are operating, or when the In Use/Memory indicator lights up* - When paper jams occur - When the platen unit is not returned to the original position - When an error code appears and the Alarm indicator flashes - When PRESS SET KEY is displayed * Only for the imageCLASS D680 model Setting the Energy Saver Mode Manually 1 Press Energy Saver. • The LCD is turned off and the Energy Saver key lights up. • Right after the machine is restored from the energy saver mode, or right after copying finishes, wait NOTE about 5 seconds before pressing Energy Saver. Restoring from the Energy Saver Mode 1 Press Energy Saver. • The Energy Saver key goes off and the machine enters standby mode. • The machine can be restored from the energy saver mode immediately. However, it may vary according NOTE to room temperature and circumstances. 1-8