Canon imageCLASS D880 imageCLASS D800 Series Set-Up Instructions - Page 2
Load paper., Install the cartridge. - paper jam
View all Canon imageCLASS D880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Install the cartridge. 1 2 Remove the cartridge from its bag. Rock the cartridge several times to distribute the toner evenly. 3 4 Place the cartridge on a flat and stable surface, grip the sealing tape tab, and snap in the direction shown. Make sure that the tab is detached from the cartridge. 5 Remove the sealing 6 tape completely. Load paper. 1 Pull out the 2 cassette until it stops. Grasp the cartridge with one hand, firmly and slowly pull out the sealing tape tab with the other hand. Arrow Mark Slide the cartridge into the machine with the arrow mark up as far as it will go. Close the cartridge cover and slide the platen unit back to the original position. Load the paper stack beneath the cassette's length guide 1 and width guides 2. Make sure that the paper stack does not exceed the length and width guides in the cassette. Failure to do so will cause a paper jam. Gently insert the cassette as far as it will go.