Canon imageCLASS MF113w User Guide - Page 37
Setting IPv6 Addresses, Start the Remote UI and log in to System Manager Mode.
View all Canon imageCLASS MF113w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Setting Up Setting IPv6 Addresses 22EJ-00L The IPv6 addresses of the machine can be configured via the Remote UI. Before setting IPv6 addresses, check the IPv4 address settings ( Viewing IPv4 Settings(P. 34) ). You need to set the correct IPv4 settings to use IPv6 addresses. Note that the scan function that uses the scanner driver or MF Scan Utility is not available in an IPv6 environment. The machine can use the following multiple IPv6 addresses: Type Link-local address Manual address Stateless address Stateful address Description An address that is only valid within a subnet or link and cannot be used to communicate with devices beyond a router. A link-local address is automatically set when the IPv6 function of the machine is enabled. An address that is entered manually. When using this address, specify the prefix length and default router address. An address that is generated automatically using the MAC address of the machine and the network prefix that is advertised by the router. Stateless addresses are discarded when the machine is restarted (or turned ON). An address obtained from a DHCP server using DHCPv6. ● For more information about the basic operations to be performed when setting the machine from the Remote UI, see Setting Up Menu Options from Remote UI(P. 205) . 1 Start the Remote UI and log in to System Manager Mode. Starting Remote UI(P. 198) 2 Click [Settings/Registration] on the Portal page. Remote UI Screen(P. 199) 3 Select [Network Settings] [TCP/IP Settings]. 4 Click [Edit] in [IPv6 Settings]. 5 Select the [Use IPv6] check box and configure the required settings. 31