Canon imageCLASS MF113w User Guide - Page 53
Configuring Ethernet Settings, Select <Ethernet Driver Settings>
View all Canon imageCLASS MF113w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Setting Up Configuring Ethernet Settings 22EJ-010 Ethernet is a standard for communicating data in a local area network (LAN). You can set the communication mode and the Ethernet type. In general, the machine can be used without changing the defaults ( (P. 222) ), but you can change these settings to suit your network environment. 1 Select in the Home screen. Home Screen(P. 78) 2 Select . ● If the screen for entering a PIN appears, enter the correct PIN. Setting the System Manager PIN(P. 165) 3 Select . 4 Select whether to configure Ethernet settings automatically or manually. ● If auto-detection is enabled, the machine detects and automatically sets the Ethernet communication mode and the type that can be used. Configuring Ethernet settings automatically Select . Configuring Ethernet settings manually 1 Select . 2 select the communication mode. Alternately sends and receives communication data. Select when the machine is connected to a networking device using half duplex. Simultaneously sends and receives communication data. Use this setting for most environments. 3 select the Ethernet type. 47