Canon imageCLASS MF212w Getting Started Guide - Page 9
Specifying the Initial Settings, Choosing the Method to Connect the, Machine to the Computer, - manual
View all Canon imageCLASS MF212w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Specifying the Initial Settings Follow the instructions on the screen, set the language and time. For details on navigating the menu and how to input the numbers, see "Navigating the Menu and Text Input Method" ( P.8). Language English French Portuguese Spanish Current Time Set. 08/08/2014 12:52 AM (0:00-12:59) Choosing the Method to Connect the Machine to the Computer ● Connecting via a Wired LAN You can connect the machine to the computer through a wired router. Use the LAN cables to connect the machine to the wired router (access point). Make sure that there is an available port in the router to connect the machine and the computer. Have a LAN Cable of Category 5 twisted-pair cable or higher ready. ● Connecting via a USB cable You can connect the machine to the computer using a USB cable. Make sure that the USB cable you use has the following mark. ● Connecting via a Wireless LAN You can connect the machine to the computer through a wireless router*. Since it is connected to wireless, no LAN cables are needed. Check if your router has a button Select from the following two methods depending on the router (access point) that you are using. ● There is a button. You can easily setup if your router (access point) has a button, and if the mark is on the router. ● There is no button. If there is no button on your router (access point), you may manually select SSID and complete the settings. NOTE • If you are looking to install your new device via a Wireless Network connection, you can find a video and written guides with step-by-step instruction to assist you through the process from the following URL: www.usa.canon.com/WirelessHelp Viewing these guides will ensure a smooth setup of the device into your existing wireless environment. Choosing the Method to Connect: Via Wireless LAN or Other Method Use wireless LAN to connect to network? (Can config. later.) Yes No Current Time Set. Must rechg. battery for 24 hours to save time settings. After turning main power There is a button. Start from step 4 of "Push Button Mode" (P.11). Yes There is no button. Start from step 4 of "Setting the Access Point Manually" (P.12). Connect to the computer via a wired LAN Proceed to "Connecting via a Wired LAN" (P.10). Connect to the computer via a USB cable No Proceed to "Connecting via a USB Cable" (P.10). Connect to the computer via a wireless LAN later Proceed to "Connecting via a Wireless LAN" (P.10). En * A wireless router (access point), which supports IEEE802.11b/g/n, is required. 9