Canon imageCLASS MF5770 imageCLASS MF5770 Network Guide - Page 19
Specify the TCP/IP protocol., click [Next].
View all Canon imageCLASS MF5770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
5 Right-click the selected device ➞ click [Initial Settings] on the pop- up menu. 2 Specifying the Network Settings 6 In the [Initial Settings] dialog box, specify the following items ➞ click [Next]. [Subnet]: If the computer on which NetSpot Device Installer runs is connected to more than one network, select the subnet that the desired device belongs to. [Product Type]: Select the product name of your machine. If the product name of your printer is not displayed, select [imageCLASS MF5770]. 7 Specify the TCP/IP protocol. [IP Address Settings with]: [IP Address]: [Gateway Address]: Select the method for setting the IP address. • [Manual Setting]: You need to set the IP address manually. The IP address that you enter in [IP Address] is assigned to the network board. • [DHCP]: The IP address is automatically obtained via DHCP (a DHCP server needs to be active on the network). Enter the IP address assigned to the network board. Enter the gateway address used for the TCP/IP network. 2-8 Preparation for Protocol Settings