Canon imageCLASS MF5770 imageCLASS MF5770 Network Guide - Page 26
Setting Up a Computer for Printing - windows 7 driver
View all Canon imageCLASS MF5770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Specifying the Network Settings Setting Up a Computer for Printing After you have completed the protocol settings of the machine, you are ready to set up each of the computers for printing. ■ Connecting to a TCP/IP Network 2 All computers that use the printer must have TCP/IP client software installed and must be enabled for TCP/IP network use. For details, see the manuals provided with the operating system. ■ Installing the Printer Driver and Specifying the Printer Destination Setting To print from a computer, you must install a printer driver and specify a setting for the printer destination. The printer destination setting differs depending on the print protocol used for printing. Use the following information as a guide to determine the print protocol you are using, and then perform the necessary operations. • LPD (Line Printer Daemon) This is the print protocol generally used with TCP/IP. See "Printer Connection Method (LPD/Raw)," on p. 2-16 to install the printer driver and to specify the printer destination setting. • Raw This is the print protocol used with Windows 2000/XP/Server 2003. It can print at higher speeds than LPD. See "Printer Connection Method (LPD/Raw)," on p. 2-16 to install the printer driver and to specify the printer destination setting. NOTE Configuration of Windows 2000/XP/Server 2003 as a print server provides efficient management of your network printer. For the detailed procedure, see "Print Server Settings," on p. 2-19. Setting Up a Computer for Printing 2-15