Canon imageCLASS MF7480 imageCLASS MF7400 Series Basic Operation Guide - Page 350

Printer Settings 1. IMAGE REFINEMENT 2. DENSITY 3. TONER SAVER 6. PAGE LAYOUT 1. BINDING 2. MARGIN Sets whether to print smoothly the jagged outlines of characters and graphics. - ON - OFF The results of image refinement may be different depending on the types of characters and graphics you want to print. Adjusts the print density. (1-9) Sets whether the toner saving mode is enabled. - OFF - ON If [ON] is selected for Toner Saver, very light or finely detailed images may not be printed clearly. Sets the printing layout. Sets the binding position for two-sided printing. - LONG EDGE - SHORT EDGE - You cannot create a binding margin with this setting alone. Use this setting in combination with the Margin setting to create a binding margin. - For two-sided printing, the orientation of the image on the back side of the page may be changed by this setting. Sets the page margin in inches or millimeters. - INCHES (-01.90INCHES-01.90INCHES) - mm (-50.0 mm-50.0 mm) - If this setting moves the image outside the printable area, part of the image may be cut off. - Pressing [▶] increases the setting value by 0.01" (0.5 mm) each time the key is pressed. Pressing [◀] decreases the value by 0.01" (0.5 mm) each time. Holding down either [◀] or [▶] continuously speeds up the value alteration. Machine Settings 12‑21