Canon imageFORMULA CR-135i imageFORMULA CR-135i / CR-190i Installation Guide - Page 12

4 Click [Accessories], and then click [Run]. 5 Enter "D:\SU190i\setup.exe" in the [Open] fields, and then click [OK]. Connecting the Scanner to a Computer The only way to connect the scanner to your computer is with a USB cable. CAUTION • Do not turn OFF the scanner or remove the interface cable when an application is running. • Turn OFF the computer and the scanner before changing the cable. USB Connections Connect the scanner and the computer with the cable (MH2-5378) provided or a Hi-Speed USB 2.0 cable. Type A Plug Type B Plug USB Cable Installation starts. 6 Follow the instructions on the screen to complete the installation. IMPORTANT The computer may need to be restarted, after the installation, depending on the operating system. If this is necessary, make sure to restart the computer. USB Connector NOTE Connect the type B plug (square) to the scanner and connect the type A plug (flat) to the USB port on the computer. 12