Canon imageFORMULA CR-135i imageFORMULA CR-135i / CR-190i Installation Guide - Page 16
Squeeze the Print Position Adjustment Lever and move it, Carefully replace the Top Cover.
View all Canon imageFORMULA CR-135i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
3 Place the ink cartridge shown in the diagram below. 5 Squeeze the Print Position Adjustment Lever and move it to adjust the print position. CAUTION Do not touch the electrical contact on the carriage. Doing so may cause a malfunction. NOTE Do not use more than one cartridge by rotation. If you do so, applications cannot check the ink level precisely. 4 Push down the ink cartridge until it clicks into place. Top: 1.92" (48.8 mm) from the bottom edge of the document Bottom: 1.17" (29.6 mm) from the bottom edge of the document 6 Carefully replace the Top Cover. IMPORTANT Make sure that the ink cartridge is securely in place. 16
16
3
Place the ink cartridge shown in the diagram below.
CAUTION
Do not touch the electrical contact on the carriage. Doing so
may cause a malfunction.
NOTE
Do not use more than one cartridge by rotation. If you do so,
applications cannot check the ink level precisely.
4
Push down the ink cartridge until it clicks into place.
IMPORTANT
Make sure that the ink cartridge is securely in place.
5
Squeeze the Print Position Adjustment Lever and move it
to adjust the print position.
Top:
1.92" (48.8 mm) from the bottom edge of the document
Bottom:
1.17" (29.6 mm) from the bottom edge of the document
6
Carefully replace the Top Cover.