Canon imageFORMULA CR-50 CR-50/80 Instruction Manual - Page 2
Connecting the Scanner to a Computer, Turn ON the power of the CR-50/80. See Turning ON - driver
View all Canon imageFORMULA CR-50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Connecting the Scanner to a Computer Connect the CR-50/80 to a computer as follows. Make sure to install the software before connecting the scanner to a computer. • If you connect the computer and turn ON the CR-50/80 before installing the software, the following wizard screen appears. If this happens, click [Cancel], turn OFF the CR-50/80, and then install the software. The following wizard screen is an example in Windows 7. When a similar wizard screen appears in Windows XP/Vista, click [Cancel]. A Install the software Install the Scanning Utility for CR-50/80 in the setup disc provided with the CR-50/80. (See "Installing the Software," on p. 19.) B Connect the scanner to a computer Connect the CR-50/80 and the computer with a USB. (See "Connecting the Scanner to a Computer," on p. 21.) C Turn ON the power Turn ON the power of the CR-50/80. (See "Turning ON the Power," on p. 22.) D Automatically installing the device driver The device driver is installed automatically when Windows recognizes the CR-50/80 as new hardware. (See p. 23.) Wizard Screen (Windows 7) 2