Canon imageFORMULA CR-50 CR-50/80 Instruction Manual - Page 26
Push down the ink cartridge until it clicks into place.
![]() |
View all Canon imageFORMULA CR-50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
NOTE Do not use more than one cartridge by rotation. If you do so, applications cannot check the ink level precisely. F Push down the ink cartridge until it clicks into place. IMPORTANT Make sure that the ink cartridge lock lever locks the ink cartridge into the correct position. G Squeeze the Print Position Adjustment Lever and move it to adjust the print position. Top: 50.5 mm (1.99") from the bottom edge of the document Middle: 47 mm (1.85") from the bottom edge of the document Bottom: 43.5 mm (1.71") from the bottom edge of the document If the ink head drops back when installed, the two ink cartridge pins will not fit into the holes on the carriage. Push back the ink cartridge lock lever a in the direction of the arrow and reset the cartridge in the correct position b. If the cartridge does not load properly, see step 7. Ink Cartridge Lock Lever Ink Cartridge Ink Cartridge Holes Pins 26
![](/manual_guide/products/canon-imageformula-cr50-cr5080-instruction-manual-48d6038/26.png)