Canon imageFORMULA CR-50 CR-50/80 Instruction Manual - Page 37

Confirming Proper Document Feeding, Scanning starts., Start the Scanning Utility.

Page 37 highlights

F Scanning starts. NOTE When printing with the imprinter, ink may get on the leading edge of the document because the documents are ejected onto the printed surface. Ink residue Printed text (back side) Confirming Proper Document Feeding Depending on the thickness of documents scanned with the CR-50/80 and the paper thickness setting, double feeds or feeding errors may occur. After installing the CR-50/80 or before scanning documents of a different thickness, perform the procedure below to confirm that documents are separated one sheet at a time. If documents do not feed properly, see "Adjusting the Separation Roller Gap," on p. 52 to adjust for paper thickness. A Start the Scanning Utility. 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58

37
F
Scanning starts.
NOTE
When printing with the imprinter, ink may get on the leading edge of the
document because the documents are ejected onto the printed surface.
Confirming Proper Document Feeding
Depending on the thickness of documents scanned with the CR-50/80
and the paper thickness setting, double feeds or feeding errors may
occur.
After installing the CR-50/80 or before scanning documents of a
different thickness, perform the procedure below to confirm that
documents are separated one sheet at a time. If documents do not
feed properly, see “Adjusting the Separation Roller Gap,” on p. 52 to
adjust for paper thickness.
A
Start the Scanning Utility.
Ink residue
Printed text (back side)