Canon imageFORMULA DR-7090C Universal Reference Guide - Page 22
Optional Products, Stamp Unit
View all Canon imageFORMULA DR-7090C Universal manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
4. Optional Products The following options can be purchased and used on the DR-7090C, if they are necessary. Contact your sales representative. Stamp Unit The stamp unit affixes a stamp on document pages that are scanned using the feeder. The application can be used to turn stamping on or off. The stamp is a circle that has a diameter of about 0.1" (3 mm), with a cross in the center. It is stamped on the scanned side of the document page, approximately 0.4" (10 mm) from the trailing edge of the document page. Hint • The stamp pattern is fixed and cannot be changed. • When scanning both sides of a document, the sides that are stamped will differ depending on the Single Pass Duplex setting of the scanner's user mode settings. When the Single Pass Duplex setting is ON, only the front side of the document is stamped. When the Single Pass Duplex setting is OFF, both sides of the document are stamped. • The cross in the center of the stamp rotates during stamping. Stamp Position Stamp Position 14