Canon imageFORMULA DR-C225W DR-C225 / DR-C225W User Manual - Page 12

12

Handling

###HOME > Chapter 2 Important Safety Instructions > Handling###

Note the following precautions whenever using the scanner. Failure

to do so may result in a fire or electric shock.

Never place alcohol, benzene, paint thinner, or other flammable

substances near the scanner.

Do not cut, damage, or modify the power cord. Do not place heavy

objects on the power cord, and do not pull or excessively bend the

power cord.

Never connect the power cord when your hands are wet.

Do not connect the scanner to a multi plug power strip.

Do not knot or coil the power cord as this may result in a fire or

electric shock. When connecting the power cord, make sure that the

power plug is securely and completely inserted into the power outlet.

The supplied power cord set is intended for use with this scanner

only. Do not use it with other electronic equipment. In addition, do not

use power cord sets other than the one supplied with the scanner.

Doing so may result in fire or electric shock.

Do not take the scanner apart or modify it.

Never try to take the AC adapter apart or modify it in any way, as this

is dangerous.

Do not use flammable spray near the scanner.

When cleaning the scanner, push the power button to turn it OFF and

disconnect the power cord from the power supply.

Clean the scanner using a slightly dampened cloth which has been

well wrung out. Never use alcohol, benzene, paint thinner, or any

other flammable substances.

If the scanner makes strange noises, or gives off smoke, heat, or

strange odors, or the scanner does not function or other

abnormalities occur when you use the machine, immediately push

the power button to turn it off, and disconnect the power plug from the

power outlet. Then, contact your local authorized Canon dealer or

service representative to have the unit serviced.

Do not drop the scanner, or subject it to impact or strong shock.

Should the scanner ever become damaged, immediately push the

power button to turn it OFF, and disconnect the power plug from the

power outlet. Then, contact your local authorized Canon dealer or

service representative to have the unit serviced.

Before moving the scanner, be sure to push the power button to turn it

OFF, and disconnect the power plug from the power outlet

Do not install the scanner on a surface that is unstable, tilted, or

subject to excessive vibrations. Doing so may cause the scanner to

fall, resulting in personal injury or damage to the scanner.

Never place small metal objects such as staples, paper clips, or

jewelry on the scanner. These items may fall into the scanner, and

cause a fire or electric shock. Should such objects ever fall inside the

scanner, immediately push the power button to turn it OFF, and

disconnect the power plug from the power outlet. Then, contact your

local authorized Canon dealer or service representative to have the

unit serviced.

Do not install the scanner in a humid or dusty location. Doing so

might cause a fire or electric shock.

Do not place objects on top of the scanner. Such objects may tip or

fall over, resulting in personal injury.

Connect only to a power outlet of the rated voltage and power supply

frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your

region).

When unplugging the power cord, grasp it firmly by its plug. Do not

pull directly on the power cord, as this may damage or expose the

cord’s internal wiring, resulting in a fire or electric shock.

Leave sufficient space around the power plug so that it can be

unplugged easily. If objects are placed around the power plug, you

will be unable to unplug it in an emergency.

Do not allow water or flammable substances (alcohol, paint thinner,

benzene, etc.) to spill into the scanner, as this may result in a fire or

electric shock.

Push the power button to turn the scanner OFF for safety when not

using the scanner for a long period of time, such as overnight. Also,

push the power switch to turn it OFF, and disconnect the power cord

from the power outlet for safety when the machine will not be used for

an extended period of time, such as during consecutive holidays.

Section	Page
Chapter 1 Introduction	2
About This Manual	2
Features of the Scanner	3
Names and Functions of Parts	5
Regulations	7
Trademarks	8
Chapter 2 Important Safety Instructions	10
Installation Location	10
AC Adapter	11
Moving the Scanner	11
Handling	12
Disposal	13
When sending the scanner for repairs	13
Chapter 3 Installing the Software	14
System requirements	14
Setup Disc Contents	15
Software Installation	17
Chapter 4 Connecting the Scanner	21
Connecting the Scanner to the Computer	21
Turning the Power ON	22
Chapter 5 Placing Documents	24
Documents	24
Switching the Feed and Eject Methods	26
Placing Documents for Standard Feeding	26
Placing Documents for Non Separation Feeding	29
Placing Cards	31
Placing Folded Documents	32
Setting the Long Document Mode	34
Chapter 6 Scanning with CaptureOnTouch	37
What is CaptureOnTouch?	37
Starting and Exiting CaptureOnTouch	39
Screen Descriptions	41
Standard Scanning	41
Scanning Shortcut	44
Scanning with Start Button	48
Operations for the scanned image edit window	49
Select document settings	52
Setting the output	54
Scanning Shortcut setting	55
About file formats	55
Environmental Settings	57
Chapter 7 Setting the Scanner Driver	61
Configuration and Functions of the Scanner Driver	61
Setting Basic Scanning Conditions	64
Function Restrictions Depending on Mode Setting	67
Chapter 8 Special Scanning	69
To scan unregistered size documents	69
When you want to specify the scan area	70
When you want to delete the images of the blank pages in two-sided documents	71
When you do not want to scan colored lines and text	72
When you want to enhance the color red	73
When you want to enhance contours in images	74
When you want to make lines or characters in the scanned images thicker	75
When you want to enhance text that is difficult to read because of factors such as the background of the scanned document	76
When you want to detect multiple pages fed at the same time	77
When you want to scan a document placed upside-down	78
When you want to match the orientation of images to the text when scanning a mixture of pages with different text orientations	79
When you want to rotate the images of a document placed horizontally to correct the orientation	80
When you want to set the scanner conditions automatically	81
When you want to use batch separation for scanning	82
When you want to use multistream settings for scanning	83
When you want to save a scanner driver setting	85
Scan Panel	86
Chapter 9 Regular Maintenance	87
Cleaning the Scanner	87
Cleaning the Scanning Glass and the Rollers	88
Adjusting the Reduction Ratio	91
Chapter 10 Replacing Consumable Parts	94
When to replace the consumable parts	94
Opening and Closing the Front Unit	95
Replacing the Feed Roller	96
Replacing the Retard Roller	97
Resetting the Counters	98
Auto Power Off Setting	100
Chapter 11 Uninstalling the Software	102
Uninstallation	102
Chapter 12 Troubleshooting	103
Clearing a Paper Jam	103
Common Problems and Solutions	106
Software Troubleshooting	108
Useful tips	108
Chapter 13 Appendix	111
Specifications	111
Replacement parts	113
Option	113
About the Flatbed Scanner Unit 101/201	113
External Dimensions	114

Canon imageFORMULA DR-C225W DR-C225 / DR-C225W User Manual - Page 12

Handling, Note the following precautions whenever using the scanner. Failure

Page 12 highlights