Canon imageFORMULA ScanFront 330 Setup and Operation Guide - Page 77
Set the scan conditions. See Scan/Delivery, Options on p. 3-24., Press [Start] to start scanning.
View all Canon imageFORMULA ScanFront 330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
6. Press [Start] to start scanning. Scanning stops after the document has been scanned. 5. Set the scan conditions. (See "Scan/Delivery Options" on p. 3-24.) IMPORTANT When you use a job button for scanning, the subsequent procedure varies as follows in accordance with the job button settings. For details, see "Registering New Job Buttons" on p. 4-18. • If [When you select this Job Button] is set to [Skip Scan Setting Screen] and you press a job button, scanning is started without displaying the Scan/Delivery Options screen of Step 4. • If [Send the files immediately after scanning] is set to [ON], scanning ends without displaying the continue to scan confirmation screen of Step 7 and then the address confirmation screen of Step 10 appears. • If [Confirm addresses before sending] is set to [OFF], the image is sent without displaying the address confirmation screen of Step 10 and the operation ends. IMPORTANT • If [Send the files immediately after scanning] is set to [ON] in Delivery Options of the Scan/Delivery Options screen, scanning ends without displaying the continue to scan confirmation screen, and the address confirmation screen of Step 10 appears. • When the confirmation message is left displayed and the scanner transitions to Low Power Mode, all of the data scanned up until that point is discarded. (See p. 3-3.) 7. Check the document and go to the next step. 3-16 • Press [Abort] to cancel the scanned images and return to the Scan/Delivery Options screen. • Press the [Continue] button to resume scanning. • Press [Complete] to go to the Send screen.