Canon imagePROGRAF TA-20 series User Manual - Page 191
Width correction
View all Canon imagePROGRAF TA-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Width correction Corrects pen widths in accordance with a specific correction setting. Correction settings can be configured for two groups: Black/gray and Color. Select and apply the correction amount according to the pen color when performing a line drawing command of HP-GL/2 data. This setting item is displayed by tapping in the following order. (Setup) > Device settings > Print settings > HP-GL/2 print settings > Line & pen manager Note • This setting is not applied for the white pen, which has the same RGB values (255). • This setting is applied to vector data line widths. • When this setting is a minus value, it is not applied to fine lines of widths that are less than the minimum line width of the printer. • If the setting value is smaller than 1 dot, the value of 1 dot width is applied. • When ON is selected for Thicken fine lines, the resulting line may be thicker than the specified setting. • Black/gray For configuring the correction setting of black and gray line widths. A value within the range of -20 to +20 can be specified. 1 unit of the correction value is equivalent to 0.025 mm. • Color For configuring the correction setting of color line widths. A value within the range of -20 to +20 can be specified. 1 unit of the correction value is equivalent to 0.025 mm. LINE WIDTH CORRECTION EXAMPLE • Negative (-) setting • Positive (+) setting 191