Canon imagePROGRAF TA-20 series User Manual - Page 627
When loading paper in the printer, is the media loaded the same as the media
View all Canon imagePROGRAF TA-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 627 highlights
If using paper thinner than 0.004 inches (0.1 mm), set Transport unit vacuum strength in the touch screen menu to Weak. If that does not resolve the problem, increase the Paper Thickness (Head Height) setting in the touch screen menu. Adjusting Vacuum Strength Troubleshooting Paper Abrasion and Blurry Images Check 5 When loading paper in the printer, is the media loaded the same as the media type selected on the touch screen? Select the correct media type in the touch screen menu when loading paper in the printer. Loading Rolls in the Printer Loading Sheets in the Printer Check 6 Does the paper have a strong curl at the front edge or is it buckled? Set Cutting mode in the touch screen menu to User cut, and set leading edge detection to Do not detect. To keep track of the amount of roll paper remaining, set Manage remaining roll amount to Disable before loading the roll paper, and then restore the setting of Manage remaining roll amount after the roll paper is loaded. Specifying the Cutting Method for Rolls Keeping Track of the Amount of Roll Paper Left 627