Canon imagePROGRAF W8400D W8400 User's Guide - Page 27
Store Setting, You can adjust the density of PM Y, M, C, K
View all Canon imagePROGRAF W8400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Function Menus Menu Item Color Adj. Return Defaults Color Adj. PM Color Adj. PC Color Adj. Y Color Adj. M Color Adj. C Color Adj. K Interface Setup EOP Timer TCP/IP TCP/IP IP Mode Protocol DHCP BOOTP RARP IP Setting IP Address Subnet Mask Default G/W 1- 24 Setting Values Function No, Yes No, Yes 1, 2*, 3 1, 2*, 3 1, 2*, 3 1, 2*, 3 1, 2*, 3 1, 2*, 3 Returns all colors to default settings (2). Returns all colors to default settings (2). You can adjust the density of PM Y, M, C, K, PM, PC one by one and perform the corrections. The settings can be performed in the range 1 to 3 (the standard default setting is 2). Set to 1 for a light adjustment or set to 3 for a dark adjustment. 10 sec., 30 sec., 1 min., 2 min., 5 min., 10 min*., 30 min., 60 min. On Manual*, Automatic Off*, On Sets the job timeout setting for the printer. Sets the TCP/IP protocol settings of the network interface. After setting each TCP/IP item, select Store Setting to save the settings and enable them. This menu is displayed only when the network interface is installed. (→ P.5-12) The setting for TCP/IP protocol is locked On. This setting cannot be changed. This setting determines whether the IP address is set automatically or a fixed IP address is entered manually. Selects the type of server when the printer is set for automatic entry of the IP address. 0.0.0.0* to 255.255.255.255 Sets the printer network information when using a static IP address. Enter the IP address allocated to the printer, network subnet mask, and default gateway. TOP Chapter 1 Basic Use Chapter 2 Using Various Media Chapter 3 Printing by Objective Chapter 4 Maintenance Chapter 5 Using the Printer in a Network Environment Chapter 6 Troubleshooting Chapter 7 Operating the Function Menu Contents Index