Canon imagePROGRAF W8400D Large Format Printer Move Procedure - Page 3
Please Wait, Ink Draining
View all Canon imagePROGRAF W8400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
7 Open the ink tank cover, then remove all the ink tanks. Place each ink tank in a plastic bag and seal the bag. Store the removed tanks with the ink supply ports facing up (a). If the ink tanks are stored with the ink supply ports (a) facing down, ink may leak out. 8 Lock all of the ink tank covers, then close the right cover. Please Wait.. appears followed by Ink Draining..while the ink is sucked from inside the tubes. This process requires about 4 minutes to complete. The printer switches off automatically once the process is complete. 9 Disconnect the power cord, earth wire and interface cable.
7
Open the ink tank cover, then remove all the ink tanks.
Place each ink tank in a plastic bag and seal the bag.
Store the removed tanks with the ink supply ports facing up (a).
If the ink tanks are stored with the ink supply ports (a) facing down, ink may
leak out.
8
Lock all of the ink tank covers, then close the right cover.
Please Wait
.. appears followed by
Ink Draining
..while the ink is sucked
from inside the tubes. This process requires about 4 minutes to complete.
The printer switches off automatically once the process is complete
.
9
Disconnect the power cord, earth wire and interface cable.