Canon imagePROGRAF iPF5100 iPF5100 User Manual - Page 196

Handling sheets for paper feed slots Handling sheets for paper feed slots Selecting the Tray as the Paper Source You can switch between manual and auto paper feed methods by pressing the Feeder Selection button. The Auto Feed lamp is lit when feeding paper automatically, and the Paper Tray lamp is lit when feeding paper manually. When loading paper in the tray, you must specify manual feed. Press Feeder Selection to activate the Paper Tray lamp (a). Caution • Paper jams may occur if you load paper other than the paper specied in the paper settings for the media source. If you insert the edge of a roll in the Paper Feed Slot after you have selected sheets as the type of paper in the media source on the Control Panel and specied the type and size of paper, the printer will prepare to print on the roll. If you print under these conditions, an error will occur when the roll is ejected. (→P.747) Note • You cannot switch the paper source in the following situations: • If the Message lamp is ashing Check the message on the Display Screen and take action as necessary. (→P.729) • If the Data lamp is ashing Select the paper source after printing is nished. • If a printer menu operation is in progress Select the paper source after the operation is nished. After the Paper Tray lamp is lit, the printer automatically shows a menu for selection of the paper type on the Display Screen. And then specify the paper type. (→P.168) 182 Handling Paper