Canon imagePROGRAF iPF5100 iPF5100 User Manual - Page 719

Problems with the printing quality Immediately After Borderless Printing, the Trailing Edge Margin is Soiled During Regular Printing Cause Corrective Action Depending on your printing environment, after borderless printing in which the leading and trailing edge of the roll is cut automatically, any ink adhering to the cutter unit may rub off on the next printed document. Follow these steps to set the Between Pages setting of Drying Time in a range of 30 seconds to 3 minutes before borderless printing. 1.On the Main sheet of the printer driver, click Settings in Media Type . 2.Select the ink drying time in the Between Pages list of Drying Time . Roller marks are left across the trailing edge of paper Cause Corrective Action A document was removed after printing from the Following the instructions, press the ▲ button, Front Paper Feed Slot without pressing the ▲ button. remove the paper, and then press the ▼ button. Wipe away any soiling on the rollers. (→P.670) (→P.673) Line thickness is not uniform (Windows) Cause In the Special Settings dialog box of the Windows printer driver, Fast Graphic Process is selected. Corrective Action Open the printer driver's Properties dialog box from Print in the application software's File menu, and try printing following the steps below. 1.Remove the check from Open Preview When Print Job Starts in the Main sheet. 2.Remove the check from Page Layout in the Layout sheet. 3.Click the Special Settings button in the Layout sheet to open the Special Settings dialog box, and remove the check from Fast Graphic Process . Troubleshooting 705