Canon imagePROGRAF iPF5100 iPF5100 User Manual - Page 58

Control Panel First Level Second Level Third Level Fourth Level Fifth Level Job Status OK Sixth Level CANCELED Print Start Time yyyy/mm/dd hh:mm Print End Time yyyy/mm/dd hh:mm Print Time xxx sec. Print Size xxxxxxxx sq.mm Media Type Interface USB Network IEEE1394 Ink Consumption xx.x ml Counter Cut Count *1: Displayed if a roll is loaded. *2: Displayed if the Roll Feed Unit is installed. *3: Displayed if Chk Remain.Roll is On. *4: Displayed if IP Mode is Automatic. *5: Only these menus are displayed during printing. *6: For information on the types of paper Media Conguration Tool the printer supports, refer to the Paper Reference Guide. (→P.107) The paper type setting in the printer driver and related software (as well as on the Control Panel ) is updated when you install the Media Conguration Tool from the User Software CD-ROM or if you change paper information by using the . See the Media Conguration Tool Guide (Windows) or Media Conguration Tool Guide (Macintosh). *7: Available only if Auto Detect is Off. *8: Available only if NetWare is On. *9: Follows the setting in Date Format. *10: Displayed if paper is loaded in the tray. *11: This menu is only displayed during printing. *12: Not displayed if a roll or a sheet has been fed. 44 Printer Parts