Canon imagePROGRAF iPF610 iPF610 User Manual - Page 67

Control Panel Setting Item (The paper type is Bordless Margin displayed here.)(*1) Description, Instructions Adjust the margin during borderless printing. Choose Automatic to have the printer automatically detect the paper width and congure the margin settings for borderless printing. If margins are mistakenly created when Automatic is selected, choose Fixed. In this case, the paper width is not detected automatically, and the document is printed without borders, using the margin settings required by the printer. CutDustReduct. Choose On to reduce the amount of debris generated when cutting lm and similar media by printing a line at the cut position. This option reduces the amount of debris given off after cutting. It also helps prevent adhesive from sticking to the cutter and keeps the cutter sharp if you use adhesive paper. (→P.140) Manual Feed When printing manually, choose the Paper Feed Slot. Normally, choose Top. For heavyweight paper such as POP Board, choose Front. NearEnd Sht Mrgn Specify a margin at the leading edge of sheets to ensure better printing quality at the leading edge. Note that if you choose 3mm, it may lower the printing quality at the leading edge and affect feeding accuracy. The printed surface may be scratched, and ink may adhere to the leading edge. Return Defaults Choose Yes to restore Paper Details to the factory default values. *1: For information on the types of paper the printer supports, refer to the Paper Reference Guide. (→P.112)The paper type setting in the printer driver and related software (as well as on the Control Panel ) is updated when you install the printer driver from the User Software CD-ROM or if you change paper information by using the Media Conguration Tool.See the Media Conguration Tool Guide (Windows) or Media Conguration Tool Guide (Macintosh). Printer Parts 53