Canon imagePROGRAF iPF810 iPF810 User Manual - Page 688

Messages regarding printing or adjusment Messages regarding printing or adjusment Use another paper. Cause The Printhead and feed amount cannot be adjusted when highly transparent lm is loaded. Corrective Action Press the Online button to clear the error. We recommend using a type of paper that you often use, other than lm, for Printhead adjustment. (→P.554) Press the Online button to clear the error, and then adjust the feed amount manually. (→P.566) Cannot print as specied. Lift the release lever and replace paper with A4/LTR (vertical) or larger. Cause Corrective Action The loaded paper is too small. Switch to paper A4/Letter (vertical) or larger. Lift the release lever and replace roll with 10 in. wide or larger roll. Cause Corrective Action The loaded paper is too small. Load a roll 10 inches wide or larger. Cannot adjust band. Cause The Printhead nozzles are clogged. Corrective Action Execute Auto Band Adj. again, as follows. 1.Press the Online button to clear the error. 2.Print a test pattern to check the nozzles. (→P.587) 3.Clean the Printhead if the nozzles are clogged. (→P.588) 4.Execute Auto Band Adj. again. (→P.564) Highly transparent lm is loaded that cannot be used Press the Online button to clear the error, and then for automatic feed amount adjustment. adjust the feed amount manually. (→P.566) 674 Error Message