Canon imageRUNNER ADVANCE 8295 imageRUNNER ADVANCE 8200 Srs Before Using This - Page 44
Upright Control Panel, ID Log In/Out key
View all Canon imageRUNNER ADVANCE 8295 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Upright Control Panel 1 2 33 44 119 55 118 66 77 117 88 99 1166 1155 1144 1133 1122 1111 1100 1 Processing/Data Indicator Flashes or blinks green when the machine is performing operations, and maintains a steady green light when fax data is stored in memory. 2 Error Indicator Flashes or lights if there is an error in the machine. 3 Settings/Registration key Press to specify settings/registration. 4 Energy Saver key Press to set or cancel the Energy Saver mode/Sleep mode. Lights when the machine enters the Energy Saver mode/Sleep mode. For more information on the mode which activates after (Energy Saver) is pressed, see e-Manual > Settings/Registration. 5 Counter Check key Press to display the copy and print count totals on the touch panel display. 6 Numeric keys Press to enter numerical values. 7 Clear key Press to clear entered values or characters. 8 Main Power Indicator Lights when the main power is turned ON. 9 Edit Pen Use when operating the touch panel display, such as to enter characters. 10 Stop key Press to stop a job in progress, such as a scan, copy, or fax (scanning only) job. 11 Start key Press to start an operation. 12 Reset key Press to restore the standard settings of the machine. 13 ID (Log In/Out) key Press to log in/out when a login service such as Department ID Management or SSO-H has been set. 14 Touch Panel Display The settings screen for each function is shown on this display. Eight function keys are displayed by default. 15 Brightness Adjustment Dial Use to adjust the brightness of the touch panel display. 16 Volume Settings key Press to display the screen for adjusting settings, such as the transmission volume and fax sending/receiving alarm volume. 42